HeatFab 6" x 38" - 70" Adjustable Saf-T Pipe Single Wall Back Stove Pipe (2606B)
The 2606B Saf-T Pipe is a single wall connector pipe that may be used to vent safety-certified wood or coal-fired appliances with a flue gas temperature not exceeding 1000° F. Saf-T Pipe is available in diameters of 5”, 6”, 7” and 8” and requires a 2” overlap.
The installation must conform to applicable National, Regional, State and local building codes and NFPA 211, the standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances. Contact the Authority Having Jurisdiction prior to beginning any work to obtain any required permits. Follow the appliance manufacturer’s installation instructions carefully.
When it comes to wood and coal burning appliances, safety and durability are paramount. Saf-T Pipe is a heavy-duty stove pipe system designed to meet the rigorous demands of residential and commercial use. With its robust construction and smart design features, Saf-T Pipe stands out as one of the thickest and most durable stove pipes available.
Saf-T Pipe is constructed from 22-gauge cold rolled steel, making it up to 60% thicker than most single-wall stove pipe brands. This heavy-duty build ensures longevity and reliability even in the harshest conditions. You can trust Saf-T Pipe to withstand the intense heat and stress associated with wood and coal burning appliances.
One of Saf-T Pipe's standout features is its laser-welded seams and beaded joints, which eliminate smoke and flue leakage. This critical feature ensures that the pipe maintains its structural integrity and prevents potentially harmful gases from escaping into your living space.
Saf-T Pipe comes with a matte black, high-temperature finish that not only adds a touch of elegance to your stove setup but also ensures the pipe can withstand the extreme temperatures associated with wood and coal burning.
Installing Saf-T Pipe is a straightforward process, thanks to its smart design and durability. Here's a basic guide to installing Saf-T Wood Stove Pipe:
Measure Carefully: Measure the distance from your wood or coal stove to the chimney or flue opening to determine the required length of Saf-T Pipe.
Assemble Sections: Join the sections of Saf-T Pipe by attaching the female end of one section to the male end of another. Ensure a secure fit.
Connect to Appliance: Attach one end of the stovepipe to your wood or coal stove's outlet, ensuring it's firmly in place.
Connect to Chimney or Flue: The opposite end of the stovepipe should connect to the chimney or flue adapter securely.
Secure Joints: Seal all joints properly to prevent leaks.
Safety Compliance: Always adhere to safety guidelines and local building codes when installing stovepipe systems.
Q: Can Saf-T Pipe be used with both residential and commercial wood and coal-burning appliances?
A: Yes, Saf-T Pipe is designed to meet the demands of both residential and commercial applications.
Q: Is Saf-T Pipe compatible with different stove and chimney sizes?
A: Saf-T Pipe is available in 6"-8" diameters, offering versatility for various setups.
Q: How often should Saf-T Pipe be inspected and cleaned?
A: Regular inspections are essential for safety. Clean and inspect your stovepipe annually or as recommended by the manufacturer.
Q: Can I use Saf-T Pipe with other heating appliances, such as gas stoves or pellet stoves?
A: Saf-T Pipe is specifically designed for wood and coal-burning appliances. Consult the manufacturer's guidelines for other heating appliances.
Q: Does Saf-T Pipe come with a warranty?
A: Yes, Saf-T Pipe components come with the Smart Choice Warranty, providing peace of mind and confidence in your investment.
In conclusion, Saf-T Pipe offers unmatched durability and performance for wood and coal burning appliances in both residential and commercial settings. Its heavy-duty construction, leak-free design, and ease of installation make it the smart choice for those seeking a reliable stovepipe system. Whether you're heating your home or business, Saf-T Pipe ensures safety and efficiency for years to come.
While the terminology can often be a source of confusion, there are indeed differences between a chimney pipe and a stove pipe, commonly used in a home setting.
In summary, while these two types of pipes serve a similar function, their application, material, and design differentiate them. The stove pipe works inside, transitioning to the chimney pipe when the home's boundary is reached.
Often referred to by multiple names such as double-wall chimney pipe, triple-wall chimney pipe, all-fuel pipe, or insulated chimney pipe, Class A chimney pipe is primarily used to vent the high-temperature exhaust that results from burning wood, coal, or oil in various appliances. These appliances can include fireplaces, stoves, boilers and furnaces.
Although not every venting system needs a Class A pipe, this type of pipe is a strict requirement for all wood-burning fireplaces and stoves.
It is important to state that Class A chimney pipe is UL-listed. This certification allows its application across a wide range of vent pipes produced by various manufacturers as well as its use with a wide array of fireplaces, stoves, inserts, and furnaces.
However, caution has to be taken when using Class A chimney pipe. Mixing and using different brands of Class A chimney pipe within one chimney system is not advisable unless it is specifically permitted by the manufacturer. The reasoning behind this is that all brands of Class A pipes are engineered distinctly and should be used as a comprehensive system - from beginning to end.
To modify or enhance your existing chimney system, it's essential to identify your current Class A pipe's make and model. Ideally, you should buy a similarly typified unit. But suppose your existing pipe's make and model are from a phased-out or outdated brand. In that case, a complete reinstallation of your chimney system may be inevitable.
Evaluate the inclination of the roof. For instance, a 6/12 pitch denotes a vertical elevation of 6 inches over a horizontal stretch of 12 inches. Choose the flashing that is most relevant.
In compliance with the building codes, you need to calculate the lowest possible height of the chimney from the rooftop. These regulations demand that the chimney extends a minimum of 3 feet above the point where it penetrates the roof. Additionally, it must stand 2 feet taller than any part of a structure that exists within a 10-foot radius.
Check whether the installation procedure is for a 'through-the-roof' or a 'through-the-wall' setup. Additional parts like a Wall Thimble, Tee/Cap, Tee Support, and Wall Straps are necessary for a 'through-the-wall' deployment.
For optimal results, we recommend positioning the chimney inside the structure when feasible. A cold chimney exterior will lead to diminished draft and increased creosote production.
To steer clear of rafters or any obstructive items, you need to calculate two things - the needed horizontal distance and the accessible vertical height. There are two kinds of elbows accessible - 15° and 30°. However, please note that in the US, it's disallowed to use elbows that exceed 30°. To guarantee sufficient support, make use of elbow straps.
Calculate the total required lengths of both the chimney and stovepipe for the installation. If you're utilizing a 5”- 8” DuraTech pipe, deduct 1.25" per joint to get the installed length. For a pipe diameter lying between 10” and 24”, a deduction of 0.75" per joint is necessary. A reduction of 1.25" per DuraBlack stovepipe joint and 1.5" per DVL stovepipe joint must also be factored in.
The lowest acceptable height for a chimney located at sea level, assuming it's straight and vertical, should range from 10 to 15 feet above the appliance outlet. However, factors such as higher elevations, or the inclusion of junctions or a tee, will necessitate an increase of roughly 30% to 60% in the chimney's height. This is crucial to ensure an effective draft.
Ensure Fire Safety. Always keep a minimum of 2 inches distance from combustible materials. Adhere to your local construction regulations and arrange for a certified expert to carry out an inspection of your chimney.
You are required to use DVL/DuraBlack Chimney Adapter when you are linking DVL pipe to either a Ceiling Support Box or a Finishing Collar. In addition, when the connection involves DuraBlack pipe, it is mandatory to use a DVL/DuraBlack Chimney Adapter, a DuraBlack Slip Connector, or a Snap-Lock Adapter.
A Wall Thimble should be utilized in all instances where horizontal through-the-wall installations are carried out. It must be properly matched with a chimney pipe of an appropriate length. In instances where the walls are considerably thicker, the Wall Thimble's telescoping parts can be detached allowing the insertion of a custom-made extension.
It's mandatory to use an Attic Insulation Shield in all installations that penetrate through an attic, regardless of the attic's insulation status.
It is mandatory to utilize the Firestop Radiation Shield when a chimney traverses through a floor or ceiling without having a support box.
PDF Downloads:
Installation Manual
Brochures
INSTALLATION GUIDELINES:
- Plan the installation of your appliance and Saf-T Pipe in such a way that your connector run is as short and straight as possible.
- Having an installation that is too long and / or with multiple bends, can reduce system draft which can affect the operation, and / or performance of your appliance and / or chimney system. Choose the proper diameter of connector pipe. It must be at least equivalent to the stove outlet diameter.
- Each Saf-T Pipe component will have a 2” overlap, take this into consideration when planning your installation.
- All joints between sections of Saf-T Pipe must be secured with four (4) sheet metal screws per joint before firing (supplied).
- Saf-T Pipe must be installed with the smallest diameter in the direction of the appliance, arranged so condensate will drain within the connector pipe and into the appliance (see Fig. 1);
- Saf-T Pipe must be sloped upward towards the chimney at least 1/4 inch per foot of horizontal run.
No posts found
Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.