Selkirk 8 Inches Ultra-Temp Multi-Story Kit

The Selkirk 8" Ultra-Temp Multi-Story Kit is an inclusive package with components designed to install a 8" chimney that ascends directly through a standard flat ceiling, traversing multiple floors of your home. Here's a detailed breakdown of the components included:

1. 8" Ultra-Temp Round Chimney Top: Positioned as the uppermost termination point, this chimney top protects against external elements, such as rain and snow, while facilitating the efficient release of gases.

2. 8" Ultra-Temp Storm Collar: This component ensures a weather-resistant seal around the vent pipe, preventing water from infiltrating the chimney system and maintaining its integrity.

3. 8" Ultra-Temp Attic Insulation Shield: Explicitly designed for passages through attic spaces, this shield maintains proper clearances and prevents insulation from coming into contact with the vent pipe, ensuring safety.

4. 8" Ultra-Temp Firestop Joist Shield: Acting as a firestop shield, it creates a barrier around the chimney, preventing the spread of fire in case it penetrates structural elements like joists.

5. 8" Ultra-Temp Chimney Pipe Adapter: This component acts as a crucial link, connecting the vent system to the chimney ensuring a reliable and efficient connection.

6. 8" Ultra-Temp Ceiling Support: Providing essential support, this component ensures that the vent pipe is securely anchored and supported as it passes through the ceiling.

7. 8" Ultra-Temp Flashing: The flashing blocks the region where the chimney goes through the roof, keeping your home's structure strong and protecting it from the weather.

This complete Selkirk kit has everything you need to safely and correctly install a 8" chimney system that goes up and down multiple floors of your home. It meets all safety and installation standards.

Features:

• 304 Stainless Steel Inner Liner
• 430 Stainless Steel Outer Wall
• 1" Solid Pack Mineral Wool Insulation
• All residential fuels
• Adjustable lengths for ease of installation
• Multiple Support Kits available
• 4" Diameter available for tiny homes and recreational applications
• Ultra-Temp and Galva-Temp can be combined to make a complete and cost effective solution
• Smart Choice Warranty on all components

Specifications:

Downloads:

• Ultra-Temp Product Catalog
• Brochure Product Buyers Guide
• Product List Ultra-Temp
• Product Application Guide
• Sizing Chart for Fireplaces
• P Sheet General Installation Instructions
• GS General Installation Instructions

Essential Notice:

The ULTRA-TEMP/GALVA-TEMP Chimney Systems that have been tested to the maximum temperatures required by Underwriters' Laboratories Safety Standard for Factory-Built Chimneys (UL®-103). This encompasses the ULTRA-TEMP® HT/GALVA-TEMP® HT chimney systems.

• Diameter Sizes: Offered in 4" (UT), 5", 6", 7" & 8".
• Part Identification: The parts are identified by the abbreviations UT and GT.
• Clearances: Chimney systems must maintain a minimum of 2" clearance of airspace from combustible materials
• Listing: The chimney system is certified by UL 103 Type HT.
• Temperature Ratings: The systems have been tested to withstand a maximum temperature of 2100°F for 10 minutes, 1400°F for 60 minutes, and can operate continuously at a maximum temperature of 1000°F.

The Selkirk Chimney System (SCS) is designed to be an optimum choice for venting residential heating appliances that use fuels like wood, #2 oil, and both natural and LP gas. The SCS is particularly adapted for the latest, high-efficiency airtight wood stoves. It is intended for use with gravity (natural draft) and nonpositive internal pressure venting only.
If it is needed for use with an appliance having a power burner like an oil furnace, it can perform effectively, provided the appliance functions with neutral or negative draft at the outlet. However, non-residential appliances that may lead to positive pressure within the chimney are recommended to use a Selkirk Commercial Model PS or IPS system.

FRAMEWORK / SUPPORT STRUCTURES:

Selkirk Support Structures are precisely engineered with the capability to handle up to four times their maximum specified system weight at its maximum allowed height.

• * Framing dimensions may exceed the given values by a maximum of 1/2", but they should not be lesser than the stated numbers. Please verify the support dimensions before application.
• ** The 4" chimney has received approval for usage at its provided clearance by the Ceiling Support.

Support Table

Important:

• You can suspend up to 20 feet of chimney under a roof support with all joints tightened and stabilized using locking bands or screws (Option A).
• Kindly note that sloped ceilings and roofs will not have a square opening, instead, they should maintain a 2" opening.
• The specified guidelines are applicable only to flat roof and/or ceiling penetrations. The maximum support for a 4" component is 50 feet. This includes Ceiling Supports (BCS, LCS, and CSG), Wall Support (WS), Roof Support (RS), and Anchor Plate (AP).

Chimney Height Above Roof Guidelines:

Rule 1: The section of the chimney that meets the roof must rise a minimum of 3 feet above the roof's highest point.
Rule 2: Any segment of the chimney within 10 feet horizontally from a roof structure or surface must extend at least 2 feet above.