The Selkirk 7" Ultra-Temp Multi-Story Kit is an inclusive package with components designed to install a 7" chimney that ascends directly through a standard flat ceiling, traversing multiple floors of your home. Here's a detailed breakdown of the components included:
1. 7" Ultra-Temp Round Chimney Top: Positioned as the uppermost termination point, this chimney top protects against external elements, such as rain and snow, while facilitating the efficient release of gases.
2. 7" Ultra-Temp Storm Collar: This component ensures a weather-resistant seal around the vent pipe, preventing water from infiltrating the chimney system and maintaining its integrity.
3. 7" Ultra-Temp Attic Insulation Shield: Explicitly designed for passages through attic spaces, this shield maintains proper clearances and prevents insulation from coming into contact with the vent pipe, ensuring safety.
4. 7" Ultra-Temp Firestop Joist Shield: Acting as a firestop shield, it creates a barrier around the chimney, preventing the spread of fire in case it penetrates structural elements like joists.
5. 7" Ultra-Temp Chimney Pipe Adapter: This component acts as a crucial link, connecting the vent system to the chimney ensuring a reliable and efficient connection.
6. 7" Ultra-Temp Ceiling Support: Providing essential support, this component ensures that the vent pipe is securely anchored and supported as it passes through the ceiling.
7. 7" Ultra-Temp Flashing: The flashing blocks the region where the chimney goes through the roof, keeping your home's structure strong and protecting it from the weather.
This complete Selkirk kit has everything you need to safely and correctly install a 7" chimney system that goes up and down multiple floors of your home. It meets all safety and installation standards.
Size: | 7" Inner Diameter |
Material: | Stainless Steel | Aluminum | Galvanized |
Fuel Type: | Coal, Oil, Wood, Gas |
UL Listed: | UL-103-HT |
Vent Construction: | Double Wall |
Type: | Kit |
The ULTRA-TEMP/GALVA-TEMP Chimney Systems that have been tested to the maximum temperatures required by Underwriters' Laboratories Safety Standard for Factory-Built Chimneys (UL®-103). This encompasses the ULTRA-TEMP® HT/GALVA-TEMP® HT chimney systems.
The Selkirk Chimney System (SCS) is designed to be an optimum choice for venting residential heating appliances that use fuels like wood, #2 oil, and both natural and LP gas. The SCS is particularly adapted for the latest, high-efficiency airtight wood stoves. It is intended for use with gravity (natural draft) and nonpositive internal pressure venting only.
If it is needed for use with an appliance having a power burner like an oil furnace, it can perform effectively, provided the appliance functions with neutral or negative draft at the outlet. However, non-residential appliances that may lead to positive pressure within the chimney are recommended to use a Selkirk Commercial Model PS or IPS system.
Selkirk Support Structures are precisely engineered with the capability to handle up to four times their maximum specified system weight at its maximum allowed height.
Support Table
Important:
Rule 1: The section of the chimney that meets the roof must rise a minimum of 3 feet above the roof's highest point.
Rule 2: Any segment of the chimney within 10 feet horizontally from a roof structure or surface must extend at least 2 feet above.
Step 1: Multiply the roof's pitch section by the distance in feet from the peak.
|
Roof Pitch & Chimney Height |
Selkirk Corporation, ("Selkirk", "we", "us", "our") warrants our residential Chimney & Venting products (* defined below) to be free from defects in material and workmanship.
For products installed after January 1, 2009, for a period of Ten (10) years from original installation, we will provide replacement product with a similar or like quality of available Selkirk product, free of charge, excluding any installation costs.
From the Eleventh (11) through Fifteenth (15) years, we will provide replacement product at a cost of 75% off the published Retail Price in effect on the date the claim is received, excluding any installation costs.
At expiration of the Fifteen (15) year term, we will provide replacement product at a cost of 50% off the published Retail Price in effect on the date the claim is received excluding any installation costs. This warranty coverage is non-transferable and applies exclusively to the original consumer.
No posts found
Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.