There is everything you need in the Selkirk 7 Inches Ultra-temp basement heater kit to put in a six-chimney system that goes through the wall and up the side of your house. This kit has all the essential parts to ensure that your basement heater's drainage is safe and effective. Here is a list of the elements that are included:
1. 7" Ultra-Temp Chimney Pipe Adapter: This adapter is crucial for connecting different sections of the chimney, ensuring a secure and efficient fit.
2. 7" Ultra-Temp Round Chimney Top: This component serves as the uppermost termination point for your chimney, shielding the chimney from external elements like rain and snow while allowing for the efficient discharge of exhaust gases.
3. 7" Ultra-Temp Storm Collar: The storm collar makes a weatherproof seal around the vent pipe, keeping water out and the chimney system in good shape.
4. 7" Ultra-Temp Finishing Collar: The finishing collar provides a neat and secure finish at the point where the chimney penetrates the wall, enhancing the appearance and sealing the installation.
5. 7" Ultra-Temp Wall Support Kit: This kit offers support and stability for the chimney as it extends up the side of your home, ensuring secure installation against the wall.
6. 7" Ultra-Temp Wall Thimble: The wall thimble provides a safe passage for the vent pipe through the wall, maintaining proper clearances and creating a sealed connection.
7. 7" Ultra-Temp Insulated Tee and Plug: The insulated tee and plug make it easy for the vent pipe to join, ensuring it can go safely through the wall and is adequately insulated and sealed.
8. 7" Ultra-Temp Flashing: The flashing is crucial for weatherproofing and sealing the area where the chimney passes through the roof, preventing leaks and safeguarding the structure of your home.
9. 7" Ultra-Temp Wall Band: The wall band offers additional support and stability for the vent pipe along the side of your home, ensuring it is securely anchored.
Setting up the Selkirk 7" Ultra-Temp Basement Heater Kit is more accessible with this kit. All the essential parts for installing a 7" chimney system for your basement heater are in this complete package, which comes in one box. This kit has everything you need for a safe and effective venting system for your basement heater, whether you are a homeowner or a professional installation.
Size: | 7" Inner Diameter |
Material: | Stainless Steel | Aluminum | Galvanized |
Fuel Type: | Coal, Oil, Wood, Gas |
UL Listed: | UL-103-HT |
Vent Construction: | Double Wall |
Type: | Kit |
The ULTRA-TEMP/GALVA-TEMP Chimney Systems that have been tested to the maximum temperatures required by Underwriters' Laboratories Safety Standard for Factory-Built Chimneys (UL®-103). This encompasses the ULTRA-TEMP® HT/GALVA-TEMP® HT chimney systems.
The Selkirk Chimney System (SCS) is designed to be an optimum choice for venting residential heating appliances that use fuels like wood, #2 oil, and both natural and LP gas. The SCS is particularly adapted for the latest, high-efficiency airtight wood stoves. It is intended for use with gravity (natural draft) and nonpositive internal pressure venting only.
If it is needed for use with an appliance having a power burner like an oil furnace, it can perform effectively, provided the appliance functions with neutral or negative draft at the outlet. However, non-residential appliances that may lead to positive pressure within the chimney are recommended to use a Selkirk Commercial Model PS or IPS system.
Selkirk Support Structures are precisely engineered with the capability to handle up to four times their maximum specified system weight at its maximum allowed height.
Support Table
Important:
Rule 1: The section of the chimney that meets the roof must rise a minimum of 3 feet above the roof's highest point.
Rule 2: Any segment of the chimney within 10 feet horizontally from a roof structure or surface must extend at least 2 feet above.
Step 1: Multiply the roof's pitch section by the distance in feet from the peak.
|
Roof Pitch & Chimney Height |
Selkirk Corporation, ("Selkirk", "we", "us", "our") warrants our residential Chimney & Venting products (* defined below) to be free from defects in material and workmanship.
For products installed after January 1, 2009, for a period of Ten (10) years from original installation, we will provide replacement product with a similar or like quality of available Selkirk product, free of charge, excluding any installation costs.
From the Eleventh (11) through Fifteenth (15) years, we will provide replacement product at a cost of 75% off the published Retail Price in effect on the date the claim is received, excluding any installation costs.
At expiration of the Fifteen (15) year term, we will provide replacement product at a cost of 50% off the published Retail Price in effect on the date the claim is received excluding any installation costs. This warranty coverage is non-transferable and applies exclusively to the original consumer.
No posts found
Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.