Selkirk 6 Inches Ultra-Temp Roof Mount Support Kit

The Selkirk 6" Ultra-Temp Roof Mount Support Kit has everything you need to put in a 6" chimney straight through a cathedral ceiling or flat roof. This kit has all the necessary parts for a secure and secure vent fitting. Here is a list of the benefits that come with it:

1. 6" Ultra-Temp Finishing Collar: The general look of the installation is improved by this part, which gives the area where the chimney enters onto the roofing or ceiling a smooth look.

2. 6" Ultra-Temp Roof Support Package: This package strengthens the vent pipe and ensures it stays stable through an attic or cathedral ceiling by supporting it inside the roof.

3. 6" Ultra-Temp Round Chimney Top: Positioned as the upper termination, this chimney top protects against external elements like rain and snow, enabling efficient gas venting.

4. 6" Ultra-Temp Roof Brace Kit: This kit ensures that the exhaust pipe is securely attached and backed up as it goes through the roof, improving safety and stability.

5. 6" Ultra-Temp Ceiling Plate: As a support structure within the ceiling, this plate provides a secure and safe passage for the vent pipe.

6. 6" Ultra-Temp Flashing: Essential for weatherproofing, the flashing seals the area where the chimney passes through the roof, preventing leaks and maintaining the structural integrity of your home.

7. 6" Ultra-Temp Storm Collar: This component creates a weather-resistant seal around the vent pipe, preventing water from entering the chimney system and maintaining its integrity.

This kit comes with everything you need to build a 6" chimney that goes up through the roof's flat or cathedral ceiling in a way that is safe and legal. This will make sure that your home works well and is safe.

Features:

• 304 Stainless Steel Inner Liner
• 430 Stainless Steel Outer Wall
• 1" Solid Pack Mineral Wool Insulation
• All residential fuels
• Adjustable lengths for ease of installation
• Multiple Support Kits available
• 4" Diameter available for tiny homes and recreational applications
• Ultra-Temp and Galva-Temp can be combined to make a complete and cost effective solution
• Smart Choice Warranty on all components

Specifications:

Downloads:

• Ultra-Temp Product Catalog
• Brochure Product Buyers Guide
• Product List Ultra-Temp
• Product Application Guide
• Sizing Chart for Fireplaces
• P Sheet General Installation Instructions
• GS General Installation Instructions

Essential Notice:

The ULTRA-TEMP/GALVA-TEMP Chimney Systems that have been tested to the maximum temperatures required by Underwriters' Laboratories Safety Standard for Factory-Built Chimneys (UL®-103). This encompasses the ULTRA-TEMP® HT/GALVA-TEMP® HT chimney systems.

• Diameter Sizes: Offered in 4" (UT), 5", 6", 7" & 8".
• Part Identification: The parts are identified by the abbreviations UT and GT.
• Clearances: Chimney systems must maintain a minimum of 2" clearance of airspace from combustible materials
• Listing: The chimney system is certified by UL 103 Type HT.
• Temperature Ratings: The systems have been tested to withstand a maximum temperature of 2100°F for 10 minutes, 1400°F for 60 minutes, and can operate continuously at a maximum temperature of 1000°F.

The Selkirk Chimney System (SCS) is designed to be an optimum choice for venting residential heating appliances that use fuels like wood, #2 oil, and both natural and LP gas. The SCS is particularly adapted for the latest, high-efficiency airtight wood stoves. It is intended for use with gravity (natural draft) and nonpositive internal pressure venting only.
If it is needed for use with an appliance having a power burner like an oil furnace, it can perform effectively, provided the appliance functions with neutral or negative draft at the outlet. However, non-residential appliances that may lead to positive pressure within the chimney are recommended to use a Selkirk Commercial Model PS or IPS system.

FRAMEWORK / SUPPORT STRUCTURES:

Selkirk Support Structures are precisely engineered with the capability to handle up to four times their maximum specified system weight at its maximum allowed height.

• * Framing dimensions may exceed the given values by a maximum of 1/2", but they should not be lesser than the stated numbers. Please verify the support dimensions before application.
• ** The 4" chimney has received approval for usage at its provided clearance by the Ceiling Support.

Support Table

Important:

• You can suspend up to 20 feet of chimney under a roof support with all joints tightened and stabilized using locking bands or screws (Option A).
• Kindly note that sloped ceilings and roofs will not have a square opening, instead, they should maintain a 2" opening.
• The specified guidelines are applicable only to flat roof and/or ceiling penetrations. The maximum support for a 4" component is 50 feet. This includes Ceiling Supports (BCS, LCS, and CSG), Wall Support (WS), Roof Support (RS), and Anchor Plate (AP).

Chimney Height Above Roof Guidelines:

Rule 1: The section of the chimney that meets the roof must rise a minimum of 3 feet above the roof's highest point.
Rule 2: Any segment of the chimney within 10 feet horizontally from a roof structure or surface must extend at least 2 feet above.