MHP Adjustable Single Venturi 10" to 16" Control Grills

• Arkla Models
  G416-35B, G416-36L, G416-37B, G416-37L, G446-34I, G446-40I, G446-40I1, GRAA, GRFF
• Broilmaster Models
  G2000DX-L 
• Grills requiring Extra Long venturis

We advise removing the original part and comparing it to what we list in order to make sure you choose the proper replacement part for your grill. To confirm that this component will function with your grill, you also may check your owner's manual.

IMPORTANT
I'm betting you're having a tough time bending that Flex tube, right? Don't worry - it's usually not as stubborn as it seems.
Here's a little tip: You might not be loosening the set screw enough and stretching out the rigid inner tube before you work on bending the flexible part. This could be the reason why the tube seems impossible to bend.
Here's what you gotta do:

1. Loosen the set screw. Make sure you're not fully removing the inner tube while doing so.
2. Now, extend the hard inner tube before trying to bend the flex part.
   Just a word of caution - completely removing the inner tube might knock the O ring at the end of the tube out of its place when you're sliding it back in.
   Remember, that little O ring seal needs to be in place for the tube to function optimally. So make sure it's intact. 
   Hope this clears things up!