FREE SHIPPING ON ALL FIREPLACE DOORS - 100% USA Based Customer Service - CHECK PROMOS NOW!
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Arch Door And Window Pane Design Cascade Prefab Fireplace Door

You may need to remove the track to install the fireplace door, so measure accordingly. You will need to measure the fireplace opening in three different places, both vertically and horizontally to the nearest 1/16". Enter the smallest size into the price calculator.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside the fireplace opening. Measure the width and height of the inner steel opening where the fireplace door will fit. This will be the same position that the fireplace manufacturer's door was installed. DO NOT measure the finishing material in front of the fireplace (brick, stone, marble, tile, etc). Always use the exact MINIMUM measurements for both height and width when ordering a replacement fireplace door.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in

Size Range For Pricing: Up To 38"W and Up To 36"H

=:

$2,146.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Fabrication Time 4-6 Weeks Question | Why Buy From Us?

INSET DEPTH This is the distance from the face of the zero-clearance fireplace to any existing obstruction inside the opening. The inset depth affects the amount that the enclosure will fit into the opening. For example, the Door frame is 1-1/8” deep. If the inset depth is 1”, the face of the enclosure will protrude 1/8” from the firebox.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to support@fireplacedoorsonline.com.
Available
+

The Cascade Zero Clearance Fireplace Door with the decorative arch window pane design is one of our custom favorite prefab doors. This inside fit door made from 7 gauge steel bar stock for extra durability and strength. The mainframe is rectangular in shape, while the curved cabinet center bar doors form the shape of an arch. You can get the arched masonry look without having to change the construction of your factory-built fireplace! Choose from beautiful powder coat finishes that are guaranteed to last for years to come. The grey tempered safety glass is backed by a 1-year warranty and is also available in clear or bronze tint. We include all the mounting hardware you'll need for installation. This prefabricated glass fireplace door comes with your choice of handle and hinge designs and can be upgraded to include spark protection. 

The Cascade zero clearance fireplace door meets the UL127 code for proper ventilation requirements; it is configured with 1/4" spacers on the outside edge of the glass panes for airflow. Proudly made in the USA! Free shipping!

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Cascade Arch Conversion Zero Clearance Fireplace Door Specifications Product Specifications:

  • Fireplace Type: Prefab Wood Fireplaces or Prefab Wood Fireplaces Converted To Vented Gas Logs
  • Door Fit: Inside
  • Recessed Depth: 3/4"
  • Door Type: Bar Iron Door With Decorative Arch Door And Window Pane Design
  • Material: 2" Wide x 3/16" Deep 7 Gauge Flat Steel Frame
  • Glass: 1/4" Tempered Safety Glass (1-year warranty)
  • Glass Tints: Clear
  • Ceramic Glass: N/A
  • Mesh Screen: Cabinet Mesh Optional
  • Damper: No Damper
  • Airtight Option: N/A
  • Assembly: Fully Assembled 
  • Mounting: Z-Tab Hardware Included
  • Safety Listing: UL127

Fireplace Door Installation  

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on July 12th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!