Stainless Steel 1/4" Weave Fireplace Mesh Curtain Sets | Up to 38" Wide Openings

Stainless Steel 1/4" Weave Curtains. Update the look of your fireplace with these stainless steel mesh curtains! Made from heavy duty 19-gauge stainless wire woven in a 1/4-inch pattern, this fireplace spark screen will offer the ultimate protection from hot embers. Use these curtains in your indoor or outdoor fireplace. The stainless steel material will not corrode when exposed to Mother Nature's elements! You'll get two 24-inch wide fireplace mesh curtains (choose the length you need from 16.5 inches up to 36.5 inches), hog rings for suspension from the curtain rod, and stainless steel curtain pulls.

You'll get two 24-inch wide curtains, available in a variety of different lengths to fit your fireplace opening. The panels come with rings so that you can hang them on a mesh curtain rod. (No hardware? No problem! We've got you covered! Click here to browse through our curtain rods and pulls!)

PLEASE NOTE:
Stainless steel will discolor if it comes in contact with flames or is exposed to extreme heat. We advise using a log grate for your wood burning fire and/or making sure that your mesh curtains are placed far enough away from the flames to avoid this incident.

HOW TO MEASURE FOR YOUR A NEW CURTAIN

Replacing an exiting mesh screen?

Please measure the overall height of your existing mesh curtain including the hanger rings. Then select the measurement that is nearest to your existing mesh screen from menu above.

Ordering a mesh screen with a rod installed?

Please measure the height from your fireplace floor to the top of the rod. This will give you the overall length of the new mesh curtain with the 1/2" hanger rings. Keep in mind to give about 1/2" clearance, so the new curtain doesn't not drag along the fireplace floor

Ordering a mesh screen with no rod installed?

Measure from your fireplace floor to the firebox ceiling/opening or lintel iron (steel bar that goes across opening) and deduct 1". That should get you the overall height for the new screen.  Keep in mind to give about 1/2" clearance, so the new curtain doesn't not drag along the fireplace floor