FREE SHIPPING ON ALL FIREPLACE DOORS - CHECK OUT OUR PROMOTIONS
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Old World Masonry Fireplace Glass Door

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in

Size Range For Pricing: Up To 37"W and Up To 36"H

=:

$2,099.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 4-6 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to [email protected].
Available
+

The old world masonry fireplace door is an inviting focal point for any rustic or traditional decor! The old country style is designed to enhance and impress with its distressed corner brackets and matching handles. The rivets give the overall metalwork a distinct forged look. This handcrafted enclosure can be made to your size specifications and comes in a clear natural finish, or any of our beautiful powder coat colors. We also show the rustic glass fireplace door in two of our premium finishes - Burnished Bronze and Burnished Copper. These particular hand-applied finishes add to the character of the door and are completely unique with each enclosure that is created. Select the appropriate fit and hearth position and let us know whether or not you need a damper assembly. We offer cabinet center bars where the handles are mounted. Grey, clear or bronze tinted tempered glass is available for these replacement fireplace doors. 


Old World Masonry Fireplace Door Features Product Features:

  • 5 year warranty on workmanship and material only; 1 year glass warranty
  • Frame is hand crafted from 7 gauge steel bar stock, measuring 2 inches wide by 3/16 inch deep
  • Available as an overlap or inside fit frame, with or without a damper
  • Check out the videos for an in depth view of finish colors
  • Your choice of cabinet style or trackless bi-fold doors, both with center bar
  • 1/4 inch tempered safety glass is available in grey, clear or bronze
  • Old World style handles are mounted on the center bar of the doors
  • Bullet style hinges are subtle and blend in with the overall design of the enclosure
  • Mesh protection is optional; other upgrades available
  • Door comes fully assembled with included mounting hardware

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Old World Masonry Fireplace Door Specifications Product Specifications:

  • Door Fit: Overlap | Inside
  • Door Type: Cabinet Center Bar Doors
  • Material: 2" Wide x 3/16" Deep 7 Gauge Steel Bar Stock Frame
  • Approximate Overlap: 1 1/2"
  • Glass: 1/4" Tempered Safety Glass
  • Tempered Glass Tints: Grey | Bronze | Clear
  • Ceramic Glass: Optional
  • Mesh Protection: Optional
  • Handle Style: Old World
  • Hinge Style: Bullet
  • Damper: None | Hidden
  • Airseal Option: Optional
  • Assembly: Comes Fully Assembled
  • Mounting: Hardware Included

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on February 14th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!