Black 1/4" Weave Fireplace Screen Sets - For Fireplaces Up To 48" Wide

Over-Sized 1/4" Weave Black Mesh Now Fireplace Doors Online is offering fireplace mesh curtains for fireplaces wider than 39 inches. Add spark protection to your existing fireplace door or replace your current mesh curtain. Each panel will be 30 inches wide and are available in heights from 23 inches up to 36 inches. The hog rings add 1/2" to the height. These black fireplace curtains cover up to 48 inches with an overlapping rod.

You'll get two 30-inch wide curtains, available in a variety of different lengths to fit your fireplace opening. The panels come with rings so that you can hang them on a mesh curtain rod. (No hardware? No problem! We've got you covered! Click here to browse through our curtain rods and pulls!)

BLACK POWDER COATED STEEL WIRE

NOTE:

• PAINT CHIPS IN THE BAG ARE A NORMAL OCCURRENCE AND NOT A MANUFACTURING DEFECT 

HOW TO MEASURE FOR YOUR A NEW CURTAIN

Replacing an exiting mesh screen?

Please measure the overall height of your existing mesh curtain including the hanger rings. Then select the measurement that is nearest to your existing mesh screen from menu above.

Ordering a mesh screen with a rod installed?

Please measure the height from your fireplace floor to the top of the rod. This will give you the overall length of the new mesh curtain with the 1/2" hanger rings. Keep in mind to give about 1/2" clearance, so the new curtain doesn't not drag along the fireplace floor

Ordering a mesh screen with no rod installed?

Measure from your fireplace floor to the firebox ceiling/opening or lintel iron (steel bar that goes across opening) and deduct 1". That should get you the overall height for the new screen.  Keep in mind to give about 1/2" clearance, so the new curtain doesn't not drag along the fireplace floor