Majestic Fireplace Door For MBU36 | MBU36I | MBUC36 | MBUC36I | R36 | RC36 | 36ST | CR36R In Natural Iron

Try to find the manufacturer name and model number of the your current firebox. Where do I find that you ask. The manufacturer usually hides the metal tag inside the opening, above the refractory panels or behind the mesh curtain or inset return. Why do I need to do that? This will help us and you find the correct size door.

All our doors are aftermarket doors based on customers measurements. Even if we have the brand and model number we sill need to have the opening size. Manufactures changed openings and sizes but not the model numbers. So we want to make sure you receive the correct door.

You may need to remove the track that is there that guides your door.

Use steel measuring tape and measure to the nearest 1/16".  Now measure the width and height of the steel opening where the new full frame enclosure will fit. This has to be the same place as when you would install an original manufacturers enclosure. Measure accordingly if the exiting track can be removed or not

Never measure the finish material in front of your firebox: Brick, Stone, Marble, Granite, Tile, Slate, etc.

Very important is as well, never remove or change any other components of the fireplace, like take entire steel facing off.

(Click the image to enlarge)

Will a Door/Mesh Screen Work on your Fireplace?
Click on the images to get a closer look!

More Than 1" Return Space

Door and Mesh Curtain Will Work if Available

(Inside Fit Zero Clearance Door)

1" Minimum Return Space

Door and Mesh Screen Will NOT Work ( Door Only will Work)

(Inside Fit Zero Clearance Door)

Outside Air Handle

Needs Removed then Door Will Work

(Inside Fit Zero Clearance Door)

WILL NOT WORK IF:

Brick Panels are Flush with Facing or Angles

How To Install Your Prefab (Zero Clearance) Fireplace Door

The frame of your new fireplace door will slide back into your firebox opening by about 1-3/16". The standard mounting system, using the four sheet metal screws through the pre-drilled holes on both sides of the frame, 2 on each side. This makes it an easy and secure installation.

Manufacturer's Warranty

Manufacturer warrants the glass enclosures to be free from defects in material and workmanship for a period of one (1) year from the date of installation. Manufacturer warrants the metal work (exclusive of the finish) contained in the glass enclosures to be free from defects in the materials and workmanship for a period of two (2) years from the date of installation. Discoloration of any frame piece is caused by over firing and is considered abuse of the enclosure.

MANUFACTURER MAKES NO WARRANTIES AS TO A MAXIMUM TEMPERATURE AND STRESS WHICH MAY CAUSE GLASS BREAKAGE. LIFETIME WARRANTY ON GLASS.
Manufacturer will, however, replace without cost any glass that breaks in normal use. Manufacturer will cover shipping cost for replacement glass for a period of one (1) year from the date of installation. Warranties also are not transferable to new owners.  The foregoing limited warranty is not transferable by the customer and does not include the eventual defects caused by improper use or operation of the glass enclosure or by normal wear and tear. Manufacturer agrees that if the glass enclosure is determined to be defective in manufacture within the applicable written guarantee period set forth above, and the customer provides a written notice of such defects within fourteen (14) days of the end of such period to the customer’s local dealer, Manufacturer is limited to defects in manufacture, and Manufacturer shall not be responsible if the glass enclosure has not been used at all times with reasonable care and in accordance with the instructions which accompany each glass enclosure, and/or if any attempt has been made by any person other than Manufacturer or its authorized agents to repair, alter or otherwise interfere with the foregoing undertaking of Manufacturer is limited to the replacement of any determined by Manufacturer to be defective.
Finally, the enforceability of this limited Warranty shall be further subject to compliance with the following requirements:
A. That the customer complies with the instruction set forth above and does not misuse, abuse, alter, or modify the glass enclosure.
B. That the customer does not use the glass enclosure for a purpose other than its intended use.

DISCLAIMER
The limited warranty set forth above, is expressly in lieu of any other warranties, express or implied, including without limitation any warranty of merchantability or fitness for particular purpose, whether express or implied, and lieu of any other obligation or liability on the part of Manufacturer. Whether under theories of contract, tort or negligence, Manufacturer, shall have no liability for any consequential, incidental or special damages by reason of any act or omission, whether negligent or not, arising out of or in connection with the glass enclosure or its sale, delivery, installation, maintenance, operation, performance, or use, including without limitation any loss of use, damage to associated property or the facility, or any other similar and dissimilar losses, cost.

PLEASE NOTE:
Fireplace doors are hand crafted to the specifications of each order. Due to the nature of the anodization process on aluminum doors, and the plating/powder coating process on steel doors, slight variations in color may occur and will not be considered a warranty issue.