100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Mon - Fri: 9am - 5pm EST
Huntress Zero Clearance Fireplace Door in Matte Black

Prefab Fireplace Huntress Replacement Fireplace Door

Starting Price Shown - Calculate Your Size By Entering The Exact Measurements 
Measure the width and height of the steel opening where the enclosure will fit. This will be the same position that the fireplace manufacturer’s enclosure would be installed. Do not measure the finish material in front of the fireplace; brick, stone, marble, slate, tile, etc. You may need to remove the track to install the Prefab Door, so measure accordingly.

You will need to measure the fireplace opening in three different places, both vertically and horizontally to the nearest 1/16".  Enter the smallest size into the price calculator.

DO NOT make adjustments to sizes, we need the EXACT OPENING size.

in
in

Size Range For Pricing: Up To 32"W and Up To 28"H

=: DSP

$775.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Fabrication Time 4-6 Weeks Question | Why Buy From Us?

Please stand 6 feet away from your fireplace and take the picture of the front of your fireplace. Head On.
Available
+

The Huntress Zero Clearance fireplace door is a modern style enclosure made with heavy-duty extruded aluminum that is 29% - 33% thicker than other doors. This easy to install fireplace door comes with all the mounting hardware you'll need for an easy installation. The trackless bi-fold doors can be upgraded to cabinet style, either one offering your choice of clear or tinted tempered safety glass. The ability to customize this prefabricated fireplace glass door makes it a customer favorite!  Choose from many different powder coat or anodized finishes, select your favorite handle style and preferred damper assembly, and remember to opt for the additional spark protection. Don't wait - get this trendy and affordable aluminum fireplace door for your home. Upgrade to stainless steel hardware, hinges, and spark protection and install this enclosure on an exterior prefab fireplace! Free shipping!

Please note:
The sliding mesh will add 2 inches of depth (on top of the frame dimension) into your firebox. Cabinet mesh adds 3/4 inch.


What You Need To Know If Door Is Used Outdoors
Aluminum doors intended for outdoor use will have most components other than the outer frame and door frames made from stainless steel. Not all components are stainless however and some staining due to corrosion will occur. Fireplace doors used outdoors with stainless components will function as intended if kept clean and the moving components oiled occasionally. The manufacturer is not responsible for tarnishing or discoloration due to environmental factors.

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Hunteress Zero Clearance Fireplace Door Specifications Product Specifications:

  • Fireplace Type: Prefab Wood Fireplaces or Prefab Wood Fireplaces Converted To Vented Gas Logs
  • Door Fit: Inside
  • Material: 1" Wide x 3/8" Deep Extruded Aluminum Frame
  • Recessed Depth: 1 1/4"
  • Door Type: Trackless Bi-Fold Doors | Cabinet Doors
  • Glass: 1/4" Tempered Safety Glass
  • Glass Tint: Clear 
  • Ceramic Glass: N/A
  • Mesh Screen: Not Included (Optional)
  • Handles: Wire
  • Damper: Available
  • Airtight Option: N/A
  • Assembly: Comes Fully Assembled
  • Mounting: Hardware Included
  • Safety Listing: Air Vents In Frame To Meet UL127 

Please allow 4 weeks for shipping unless otherwise specified.

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on February 21st 2021.

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!