FREE SHIPPING ON ALL FIREPLACE DOORS - 100% USA Based Customer Service - CHECK PROMOS NOW!
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Superior 4.5" x 7.5" Secure VentTM Horizontal Termination Kit HT2 Includes SV4.5 90 Elbow

Starting at:
$406.00
Short description:

 

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 1-2 Week Question | Why Buy From Us?

Available
+

Superior 4.5" x 7.5" Secure VentTM Horizontal Termination Kit HT2 Includes SV4.5 90 Elbow (SV4.5TK90HT2)

*Termination Kits (Includes Termination, Adaptor and Firestop)

Key Features:

A horizontal termination kit, in the context of heating, ventilation, and air conditioning (HVAC) systems, is a set of components and accessories used to safely and efficiently vent the exhaust gases from a gas-burning appliance, such as a furnace, water heater, or fireplace, when the exhaust needs to exit a building horizontally through a wall or similar structure. These kits are designed to ensure proper ventilation and prevent potentially harmful or noxious fumes from entering the living or working space.

A typical horizontal termination kit may include the following components:

  1. Termination Cap: This is the exterior part of the vent where the exhaust gases exit the building. It is designed to protect against weather elements and pests while allowing for proper ventilation.
  2. Vent Pipes: These are the pipes or ducts that carry the exhaust gases from the appliance to the termination cap. Vent pipes are typically made of materials resistant to corrosion and are designed to fit together securely.
  3. Elbows and Adapters: Depending on the specific installation requirements, the kit may include elbows and adapters to help route the vent pipes effectively through the wall and connect them to the appliance.
  4. Mounting Hardware: Screws, brackets, and other mounting hardware are included to securely attach the termination cap and vent pipes to the building's exterior.
  5. Gaskets and Seals: These components are used to create a tight seal around the vent pipes, preventing any air or gas leaks.

The exact components and specifications of a horizontal termination kit can vary depending on the manufacturer and the specific appliance it is designed for. Proper installation of a termination kit is crucial to ensure the safe and efficient operation of gas-burning appliances.

When considering a horizontal termination kit, it's essential to follow the manufacturer's guidelines and local building codes to ensure that the venting system complies with safety regulations and effectively removes exhaust gases from the building. Always consult the appliance manufacturer's documentation and, if needed, seek the assistance of a qualified HVAC professional for installation.

Specifications:

  • Materials and Construction: Aluminized inner wall with galvanized steel outer wall
  • Secure twist lock connections
  • Diameters: 4 1/2 inch inner diameter and 7 1/2 inch outer diameter
  • "Floating" inner pipe for safety
  • Limited Lifetime Warranty

Key Advantages of Using a Rigid Vent System:

Using a rigid vent system in various applications, such as HVAC systems, appliances, and industrial processes, offers several advantages compared to other types of venting systems, such as flexible ducts or chimneys. Here are some key advantages of using a rigid vent system:

  1. Improved Airflow Efficiency: Rigid vent systems provide a smooth and unobstructed pathway for airflow, reducing friction and resistance. This results in better airflow efficiency, which can improve the overall performance of HVAC systems and appliances.
  2. Durability: Rigid vent components are typically made from robust materials like galvanized steel, stainless steel, or PVC, making them highly durable and resistant to wear and tear. They can withstand temperature fluctuations, exposure to moisture, and other environmental factors.
  3. Reduced Air Leakage: Rigid vent systems are less prone to air leakage compared to flexible ducts, which can develop leaks or tears over time. This helps maintain consistent air pressure within the system and prevents energy wastage.
  4. Fire Safety: In applications where fire safety is a concern, such as in venting gas appliances, rigid vent systems are preferred because they are less likely to catch fire or propagate flames. They can contain and safely channel hot gases.
  5. Resistance to Pests: Rigid vents are less susceptible to pests like rodents and insects compared to flexible ducts, which can be chewed or penetrated. This helps maintain indoor air quality and prevents contamination.
  6. Compliance with Building Codes: Many building codes and safety regulations require the use of rigid vent systems in specific applications, especially those involving gas-fired appliances. Using rigid venting ensures compliance with these codes and standards.
  7. Longevity: Properly installed rigid vent systems have a longer service life compared to flexible ducts. They are less likely to deteriorate or require frequent replacement, saving on maintenance costs over time.
  8. Easy Cleaning and Maintenance: Rigid vent systems are typically easier to clean and maintain due to their smooth interior surfaces. This helps prevent the buildup of dust, debris, and contaminants that can affect indoor air quality.
  9. Customization: Rigid vent components come in various sizes and configurations, allowing for customization to meet specific installation requirements. This versatility makes them suitable for a wide range of applications.
  10. Improved Aesthetics: Rigid vent systems can be designed to be aesthetically pleasing, especially when used in visible areas of a building or home. They can be painted or finished to match the surroundings.

While rigid vent systems offer numerous advantages, it's essential to ensure that they are properly designed and installed by qualified professionals to maximize their benefits and comply with local building codes and safety standards. Inappropriate installation can negate the advantages and pose safety risks.


Choosing The Perfect Venting System for Your Fireplace

To ensure security, effectiveness, and usefulness, it is crucial to select the ideal venting system for your fireplace. There are several factors to consider when selecting a venting system, including the type of fireplace, fuel source, local building codes, and your personal preferences. Here's a step-by-step guide to help you make the right choice:

Determine the Type of Fireplace:

  • Wood-Burning Fireplace: If you have a traditional wood-burning fireplace, you'll need a chimney or venting system designed to handle the combustion byproducts and smoke.
  • Gas Fireplace: Gas fireplaces can be vented through either a direct vent or a ventless (vent-free) system. Your choice will depend on local regulations and your heating needs.

Understand Venting Options:

  • Chimney: A traditional masonry or metal chimney is suitable for wood-burning fireplaces. Ensure it is in good condition and meets local codes.
  • Direct Vent: This system is commonly used for gas fireplaces. It has a sealed combustion chamber and draws fresh air from outside for combustion while expelling exhaust gases outside through a dedicated vent pipe.
  • Ventless (Vent-Free): Ventless gas fireplaces don't require a chimney or external venting. They burn gas cleanly and release heat and moisture into the room. However, they are subject to strict regulations in some areas due to air quality concerns.

Check Local Building Codes:

  • Before making a decision, check local building codes and regulations. Some areas have strict requirements for venting systems to ensure safety and air quality. Compliance with these codes is crucial.

Consider Efficiency:

  • Choose a venting system that maximizes energy efficiency. Direct vent systems are more efficient than traditional chimneys because they minimize heat loss.

Safety Considerations:

  • Safety should be a top priority. Ensure that the venting system is correctly installed and maintained to prevent carbon monoxide leaks and other hazards.

Aesthetics and Design:

  • The venting system should complement your home's design and aesthetics. It should be as unobtrusive as possible while still performing its function.

Professional Installation:

  • It's strongly recommended to have your venting system installed by a qualified professional who is familiar with local codes and regulations.

Maintenance:

  • Regular maintenance is essential to keep your venting system working efficiently and safely. Schedule annual inspections and cleanings, especially for wood-burning chimneys.

Budget:

  • Consider your budget for both the initial installation and ongoing maintenance. While ventless systems may be cheaper to install initially, they may have higher operating costs due to increased gas consumption.

Environmental Impact:

  • If you're concerned about environmental impact, consider the emissions associated with your chosen venting system. Wood-burning fireplaces, for example, can release particulate matter and other pollutants into the air.

Ultimately, your individual circumstances, such as the sort of fireplace you have, your local laws, and your own preferences for aesthetics and efficiency, will determine the ideal venting system for your fireplace. You can make a more informed choice by speaking with our experts at fireplace doors online.


A Comprehensive Guide to Buying a Fireplace Venting System

A fireplace venting system is an essential part of your fireplace that makes sure that smoke and combustion byproducts are securely removed from your home while providing a supply of fresh air for burning. Whether you're installing a new fireplace or upgrading an existing one, this comprehensive buyer's guide will help you understand the various venting options and make an informed decision.

1. Types of Fireplace Venting Systems:

There are three main types of fireplace venting systems:

  • Chimney Venting: Traditional masonry fireplaces typically have a brick or stone chimney. They rely on natural convection to draw air in and expel smoke out through the chimney. This type of venting is suitable for wood-burning fireplaces.
  • Direct Venting: This is a sealed system that draws combustion air from the outside and expels exhaust gases through a vent pipe. Direct vent fireplaces are highly efficient and can be used with various fuel types, including gas and propane.
  • Ventless or Vent-Free Venting: These fireplaces do not require a venting system, as they are designed to burn fuel cleanly enough that the combustion byproducts can be safely released into the room. They are typically gas-powered and can be installed almost anywhere.

2. Choosing the Right Type:

  • Consider Your Fuel Type: Determine whether you want a wood-burning, gas, or electric fireplace. Your fuel choice will influence the type of venting system you need.
  • Efficiency and Convenience: Direct vent and ventless fireplaces are typically more energy-efficient and easier to install than traditional chimneys. Consider your preferences for convenience and energy efficiency.

3. Sizing and Location:

  • Calculate Heating Needs: Determine the heating capacity you need based on the size of the room or area you want to heat. This will help you choose an appropriately sized fireplace and venting system.
  • Location: Decide where you want to install your fireplace. The location may impact the type of venting system you can use and the venting route.

4. Venting Materials:

  • Chimney Materials: If you're using a traditional chimney, consider the type of materials you want for its construction, such as brick, stone, or metal flue liners.
  • Vent Pipe Material: For direct vent fireplaces, the vent pipe is typically made of aluminum or stainless steel. Ensure the materials are suitable for your fuel type and meet local building codes.

5. Installation and Safety:

  • Professional Installation: Proper installation is crucial for safety and performance. Hire a certified technician or contractor experienced in fireplace venting systems.
  • Clearances: Ensure proper clearances to combustibles are maintained as per the manufacturer's guidelines and local building codes.

6. Venting Accessories:

  • Termination Caps: These protect the vent opening from weather and pests.
  • Chimney Liners: If you have a masonry chimney, consider installing a stainless steel liner to improve efficiency and safety.

7. Maintenance and Cleaning:

  • Regular Inspections: Schedule regular inspections and cleaning to ensure your venting system is functioning correctly and free from debris or blockages.

8. Legal and Safety Considerations:

  • Local Codes and Regulations: Check with your local authorities to ensure compliance with building codes and regulations regarding fireplace venting.
  • Carbon Monoxide Detectors: Install carbon monoxide detectors in your home, especially if you have a gas fireplace.

9. Budget Considerations:

  • Initial Cost: Consider both the upfront cost of the fireplace and venting system, as well as the ongoing operating costs (fuel, maintenance, etc.).

10. Aesthetics:

  • Design and Style: Choose a venting system that complements your home's aesthetic and blends well with your interior design.

Remember that safety should always be your top priority when selecting and installing a fireplace venting system. Consult with professionals and follow manufacturer guidelines and local regulations to ensure a safe and efficient installation.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on April 1st 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!