Clear liquid adhesive that will bond gaskets to stove doors. Will not require heat to cure. Resists 2000 degrees Fahrenheit. Pure sodium silicate.
Apply to a clean surface free of old adhesive. If possible apply to horizontal surface than work gasket into adhesive. For vertical surfaces apply to gasket working the adhesive into the fiberglass then place gasket.
To make product stickier mix 50/50 with Furnace cement. Allow adhesive to dry 24 hours before firing. Wipe up spills immediately with wet towel.
- 2 fl ounce
Product is alkaline. Avoid contact with eyes, skin or clothing. Will Etch Glass!