100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

No Glass Window Pane Design Fireplace Gate Mesh Door

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in

Size Range For Pricing: Up To 36"W and Up To 36"H

=:

$942.70
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 4-6 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
The door or screen should be sized to fit under the leading edge of any hood that comes with the unit. There should be open space under the hood to the top of the door to allow heat to leave the unit.
Please stand 6 feet away from your fireplace and take the picture of the front of your fireplace. Head On. Send only jpg,bmp,gif or pdf images!
Available
+

These gate mesh fireplace doors feature a mission style window pane design and allow you to enjoy the fire with the doors closed. Cabinet mesh has been installed into the door stiles instead of glass. You'll be able to keep warm and maintain peace of mind knowing that your home and loved ones will remain protected from sparks and embers. Along with your fireplace opening dimensions, tell us whether you need an overlap or inside fit enclosure and we will make these masonry fireplace doors to your specifications. In addition, you can choose from many beautiful powder coat finishes (including Rust Patina as shown in the main picture), or opt for a brilliant overlay appearance. You'll also have your choice of two handle styles for easy opening and closing of the cabinet doors. 


Mesh Masonry Fireplace Door with Window Pane Design Features Product Features:

  • This mesh fireplace door is for masonry fireplaces ONLY
  • Enjoy free shipping on this product; please allow 4 to 6 weeks for production
  • 5 year warranty on frame and workmanship
  • Available as an overlap or inside fit door
  • Twin cabinet style mesh doors with decorative window pane design
  • 14 gauge steel frame is 2 inches wide and 3/4 inch deep
  • Check out the videos for the available door finishes
  • 2 handle styles include square and contemporary
  • Door comes fully assembled with mounting hardware included

Mesh Doors And Vent-Free Gas Logs Or Vent-Free Fireplaces
Placing doors or the Refresh products onto vent free fireplaces may cause the doors or screens to get extremely hot. Doors are built with screen in place of glass. The door or screen should be sized to fit under the leading edge of any hood that comes with the unit. There should be open space under the hood to the top of the door to allow heat to leave the unit. Due to extreme temperatures we cannot guarantee finishes on products used for vent free applications.

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Mesh Masonry Fireplace Door with Window Pane Design Specifications Product Specifications:

  • Fireplace Type: Masonry | Prefab Wood Fireplaces | Prefab Wood Fireplaces Converted To Vented Gas Logs or Ventless | Ventfree Fireboxes
  • Door Fit: Overlap | Inside
  • Door Type: Cabinet (Twin) Doors
  • Door Design: Window Pane
  • Material: 2" Wide x 3/4" Deep 14 Gauge Steel Frame
  • Approximate Overlap: 2" (all 4 sides)
  • Mesh: Cabinet Mesh Doors
  • Glass: N/A
  • Handle Style: Square | Contemporary
  • Airtight Option: N/A
  • Assembly: Fully Assembled
  • Damper: N/A
  • Mounting: Hardware Included

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review
Last updated on June 30th 2022.
 
Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!