FREE SHIPPING ON ALL FIREPLACE DOORS - 100% USA Based Customer Service - CHECK PROMOS NOW!
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Ceramic Glass Fullview Sealed Masonry Fireplace Doors

     Send us a PHOTO of your fireplace for a FREE quote

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in
$1,630.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 4-5 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to [email protected].
Available
+ −
Brand: Wilkening
Write a review

Upgrade your fireplace with our Ceramic Glass Fullview Sealed Masonry Fireplace Door, meticulously crafted for superior functionality and visual appeal. This regular-duty fireplace door features an improved seal to minimize excess air loss, ensuring optimal energy efficiency. The expansive ceramic glass panels are designed to maximize your view of the fire, creating a stunning focal point in your home.

Features:

  • Improved Seal: Minimizes air loss, enhancing efficiency and performance.
  • Fullview Design: Offers the largest fire viewing area of any gasketed fireplace door, providing an uninterrupted view of the flames.
  • High-Quality Materials: Standard with a heat-resistant black finish and 1400-degree ceramic glass for safe closed-door burning.
  • Custom Fit: Each door assembly is custom made to exact specifications, ensuring a perfect fit and maximum viewing area.
  • High Heat Gaskets: Woven gaskets seal the perimeter of each glass section, allowing the glass to meet seamlessly in the center.
  • Room Air Inlet: Unique room air inlet at the base directs air vertically against the glass, minimizing smoke accumulation and keeping your view clear.
  • Safety Rated: Tested to UL 907 and listed with Intertek testing when ordered with ceramic glass and wood handles, ensuring safe use with masonry-installed fireplaces.

Optional Features:

  • Fire Screens: Available in sliding or more durable swinging options, with the ability to remove swinging screens for closed-door use.
  • Sliding Screen: Can be moved to the sides for an unobstructed view when the doors are closed.

The Fullview ceramic glass door is engineered to seal off your fireplace when not in use, preventing drafts and maintaining room temperature. The dual gasket system ensures a secure and efficient seal. The sliding screen, an industry standard, allows easy access and visibility, while the optional swinging screen offers enhanced durability.

Choose the Ceramic Glass Fullview Sealed Masonry Fireplace Door for a perfect blend of style, efficiency, and durability, making your fireplace the centerpiece of your living space.

NOTE:
The fullview-style door cannot be built for openings over 2000 square inches

Recommendations:

  • Overlap: Each door will be built to overlap the masonry opening by one inch on the sides and top unless specified differently.
  • Accurate Measurements: Your custom-built door will be as accurate as the measurements provided. Use a rigid tape or metal ruler for exact measurements.
  • Mounting Flange: A mounting flange will protrude into your fireplace opening 2 inches, sized to allow a 1/4” space between it and your masonry opening. This area is used to pack fiberglass insulation to seal the frame to the masonry face. Holes must be site-drilled through this flange into the masonry for attachment.
  • Caulking: Use high-temperature silicone or refractory caulking to fill any voids between the door frame and your fireplace.

Specifications:

  • Door Fit: Overlap | Inside
  • Door Type: Cabinet Doors
  • Material: 1/4" Heavy Steel Frame
  • Approximate Overlap: 1" On Overlap doors, inside fit doors don't overlap
  • Recessed Depth: 2"
  • Main Frame Finish: Satin Black
  • Door Frame Finish: Satin Black
  • Glass: 3/16 Ceramic Glass
  • Mesh Protection: Not Included (Upgrades Available)
  • Draft Assembly: Slotted Damper Optional
  • Air Sealed Option: Yes
  • Assembly: Fully Assembled
  • Handle: Black Spring Handle | Brass Spring Handle | Nickel Handle | Wood Block
  • Mounting: Hardware Included
  • Fullview style door cannot be built for openings over 2000 square inches

Downloads: 

Stove Bright Color Chart: 

1. The tools required for installation: a power drill, a 1/4" metal drill bit, a 3/16" masonry drill bit, a 5/16" socket with ratchet, a caulking gun, hi-temp silicone and safety glasses. Always wear safety glasses during installation to prevent unwanted objects in your eyes. Use properly grounded electrical cords to prevent electrical shock.

2. The door installation kit includes: an insulation strip, self tapping masonry lag screws and 2-wooden handles.

3. Remove all parts and protective packing from the door carton.

4. WARNING! This door frame must be installed PLUMB!! DO NOT FORCE THE DOOR TO FIT IRREGULAR OPENINGS!! This will cause misalignment of the glass sections and a poor seal will result. Plumb the masonry front with cement or fill the void with insulation. All doors are factory fit on a plumb surface to verify alignment and fit of the doors.

5. Measure the sides of the opening to determine where cement joints exist. Drill the builders flange using the 1/4" metal drill bit at the appropriate joint heights and in ½ inch from the back side of the builders flange. Usually, the lowest holes are up approximately 8" from the hearth line. Drill the top holes approximately 2" down from the lintel iron. See the illustration on the back of this page. Place the door frame into the opening and mark the cement seams where the holes have been made in the builders flange. Remove the frame and drill holes into these marked areas with the 3/16" masonry bit. These holes must extend in as deep as the lag screws.

6. Reposition the frame into the opening and start the masonry lags in the holes. Set the door frame in the opening and center left to right. Insert the fiberglass seal between masonry and the builders flange. Tighten the screws into the masonry cement using the 5/16" socket and ratchet. Verify that the door frame is plumb. Place the doors on the hinges and re-plumb if doors are out of alignment. Tighten all mounting screws evenly.

7. Use Hi-temp silicone to seal the inner perimeter of the builders flange to the fireplace facing for maximum sealing, avoiding contact with the outside finished front of doors and frame.

8. If a bottom mounted block wood handle is used, place several drops of crazy glue in the handle hole to permanently attach the wood handle to the door latch. The flat non-milled side of handle goes toward the door. Glue contacting the door or frame finish may discolor this finish.

Wilkening Door Installation  

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Add New
Last updated on May 24th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!