100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Envision Masonry Fireplace Glass Door

     Send us a PHOTO of your fireplace for a FREE quote

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us Before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on) When the enclosure is larger than the opening of the fireplace.
Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the enclosure will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc.) We need the exact minimum height.

 

INSIDE FIT; When the enclosure is smaller than the opening of the fireplace.
When the enclosure is smaller than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc.) We need the exact minimum width.

DO NOT make adjustments to sizes, we need the EXACT OPENING size.

in
in

Size Range For Pricing: Up To 34"W and Up To 32"H

=:

$599.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Fabrication Time 6-8 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
Please stand 6 feet away from your fireplace and take the picture of the front of your fireplace. Head On. Send only jpg,bmp,gif or pdf images!
Available
+ −
Brand: Portland Willamette
Write a review

The Envision masonry fireplace door has the hinges built into the mainframe for a seamless look. One of the smallest frames available in the fireplace door market. Made of 1-1/16" heavy-duty extruded aluminum that will last a lifetime. Choose from several powder coat finishes and select a handle style you feel goes with the door. Spark protection is an option and offered as sliding mesh. Only recommended for smooth surfaces, like tile, granite or marble.

INSTALL ON MASONRY FIREBOXES ONLY!

Installation: H for Hope You Are Handy!

  • The Envision from Portland Willamette requires power tools to install a fireplace door. 4 Mounting straps that are screwed on the frame, spaced where you need them. At the other end of the straps, you will need to mark where you want to drill your anchor holes. That's about it for the hard part, now you can set the frame and level it. Then tighten nuts and you are ready for a fire.

Envison Masonry Fireplace Door Features and Benifits Product Features & Benefits:

  • 1-1/16" wide frame and 1-3/8" deep
  • Extruded aluminum construction
  • 3/16" tempered safety glass with a lifetime warranty
  • Hinge finish always matches the door stile finish
  • Recessed depths: No Mesh = 1-3/8" / Sliding Mesh = 2-5/8"
  • Mounting hardware for your convenience
  • Proudly made in the USA
  • NOTE- THIS DOOR HAS ONLY A 3/16" WIDE OVERLAP
  • About Door Designs
    • Inside Fit Doors; Are made to fit inside your fireplace opening.
    • 3-Sided Overlap; Design provides a 3/16" overlap on each side and 3/16" overlap on top.

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Envison Masonry Fireplace Door Specifications Product Specifications:

  • Fireplace Type: Masonry
  • Door Fit: Overlap | Inside
  • Material: 1-1/16" Wide x 1-3/8" Deep Extruded Aluminum Frame
  • Approximate Overlap: 3/16 Inch
  • Approximate Recessed Depth: 1-3/8 Inch
  • Door Type: Cabinet Doors (Twin Doors) | Full-Fold Doors Full View Glass
  • Glass: 3/16" Tempered Safety Glass
  • Glass Tints: Clear | Optional Grey & Bronze
  • Ceramic Glass: N/A
  • Spark Protection: Optional
  • Handle Style: Standard
  • Damper: N/A
  • Airtight Option: N/A
  • Assembly: Comes Fully Assembled
  • Mounting: Hardware Included
  • Please note: Sliding mesh will add an additional 1-1/2 inches to the recessed depth.

Envison Masonry Fireplace Door Owner's Manual Product Manual:

Manufacturer's Warranty

Ironhaus Limited Warranty Important! Please Read This Warranty Before Installing or Using Ironhaus Products! Ironhaus products i.e., furnishings (not glass, finish, mesh parts and accessories sold separate from) are warranted to retail purchaser-user to be free from defects on material and workmanship for as long as you own your home (where enclosure was originally installed). Glass carries a 90 day warranty. Finishes are not warranted, except as found faulty upon inspection prior to use.

Because of the nature of Ironhaus finishes, instances of damage due to excessive fires, neglect, misuse or abuse will be the sole discretion of manufactures judgment for remedy. Color finishes, especially custom ordered colors may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Customer/purchaser accepts risk of any slight shade variations that may occur; however, variations deemed significantly varied may be reapplied at manufactures judgment and discretion. Customer/purchaser is responsible for following recommended guidelines of care and maintenance of the product and proper operation of same (see Care and Maintenance Instructions).

All fireplace products are warranted as expressed herein in their original installation only. Products installed improperly or in non-conformance with state and local building codes could nullify the warranties expressed and implied herein. Commercial applications are warranted for 90 days on material and workmanship from date of purchase. Transit damage and results from alterations are not covered by this warranty.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Add New
Last updated on March 28th 2023.
 
Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!