FREE SHIPPING ON ALL FIREPLACE DOORS - 100% USA Based Customer Service - CHECK PROMOS NOW!
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone & Live Chat Hours
Mon - Fri: 9:00 AM - 5:00 PM EST
Sat: 9:00 AM - 1:00 PM EST

Appalachian Masonry Fireplace Door Overlap Fit

ATTENTION: This is a fixed size door. The overall size of the door is based off of the opening dimensions you enter. In some cases the overall size of the door is not large enough for some openings, and will not provide enough overlap.

The overall size of the door should be at least 2.5" wider and 1.5" taller than the opening dimensions of your fireplace. The overall door dimensions are listed directly above the product price, and will change after opening measurements are entered. If you are unsure if this door will work for your opening, give us a call and we will assist you.

 

Starting Price Shown - Calculate Your Price By Entering The Exact Measurements
Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the fireplace door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in

Product Code: 3424

Overall Dimension: 34" x 24"

$1,051.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 4-6 Weeks Question | Why Buy From Us?

Click the image to enlarge for a closer, detailed view of the product.
Click the image to enlarge for a closer, detailed view of the product.
Click the image to enlarge for a closer, detailed view of the product.
Click the image to enlarge for a closer, detailed view of the product.
Click the image to enlarge for a closer, detailed view of the product.
Click the image to enlarge for a closer, detailed view of the product.
Z-tabs welded on to main frame are an optional method of mounting when lintel clamps are not applicable. Flanges are recommended for rough or irregular fireplaces!
Click the image to enlarge for a closer, detailed view of the product.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to support@fireplacedoorsonline.com.
Available
+

The Appalachian masonry glass fireplace door has a contemporary look and comes in a variety of finishes to match your home's decor. It is constructed of sturdy 14 gauge steel and features a mainframe width of 2 inches for superior strength! This wood burning fireplace door comes in a wide range of sizes and can be customized with or without a damper. Trackless bi-fold doors come with tempered safety glass in your choice of grey and clear tint. The optional spark protection will keep your home and loved ones safe from sparks and embers. Select from three premium handle styles for your fireplace glass door. . We find that pairing these accents with a matte black main frame really makes the color stand out! This overlap fit door needs a hearth to sit on.


Appalachian Masonry Fireplace Door Features Product Features:

  • The Appalachian door is for masonry fireplaces ONLY
  • This fireplace door ships for free; please allow 4 to 6 weeks for production and transit time
  • 5-year warranty on door frame; 1-year warranty on tempered glass
  • Available as only an overlap fit door, with or without a damper
  • 14 gauge steel frame is 2 inches wide and 3/4 inch deep
  • Check out the videos for the available door finishes
  • Door accent upgrades available - choose from Satin Brass or Brushed Chrome
  • Cabinet or trackless bi-fold door options 
  • Tempered glass is backed by a 1 year warranty and comes in clear and grey tint
  • Cabinet mesh protection is optional; other variations are available
  • Your choice of easy-grip Square, Contemporary, or Wire handles
  • The door comes fully assembled and ready to install with included hardware
  • NOTE: In order to burn a fire with the doors closed, the temperature of the fire cannot exceed 400°. The flames must always be 6 inches away from the glass.  

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Appalachian Masonry Fireplace Door Specifications Product Specifications:

  • Door Fit: Overlap
  • Door Type: Cabinet (Twin) Doors | Trackless Full-Swing Bi-Fold
  • Material: 2" Wide x 3/4" Deep 14 Gauge Steel Frame
  • Overlap: Depends On Fireplace Opening Size = Deduct your fireplace opening sizes from the overall frame size listed and then divide that number by 2. That gives you the approximate overlap this door will have.
  • Optional Door Accents: Brushed Chrome | Satin Brass
  • Glass: 1/4" Tempered Safety Glass
  • Glass Tint: Grey | Clear
  • Ceramic Glass: N/A
  • Mesh Screens: Optional
  • Damper: None | Hidden
  • Airtight Option: N/A
  • Handle Style: Square | Wire | Contemporary
  • Mounting: Hardware Included

How To Install Fireplace Door  

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on September 20th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!