Hearth And Home 11 Inch Diameter Attic Insulation Shield for SL1100 and SL400 Series Vent Pipe

11 Inch Diameter Attic Insulation Shield for HHT SL1100 and SL400 Series Chimney Pipe | AS10

The Attic Insulation Shield is used for venting installations that use SL1100 or SL400 vent pipes that pass through an attic. The shield is designed to prevent insulation and debris from entering the vent area. The attic insulation shield has been laser-etched with cut lines and ceiling pitches to make field trimming easier. Attic insulation shields must be secured in place and have specified clearances from combustible material. A ceiling firestop is required and is sold separately.

---

Features:

An attic insulation shield, also known as a chimney insulation shield, is a component used in the installation of chimneys and venting systems, particularly for wood-burning stoves, fireplaces, or other heating appliances. Its primary purpose is to create a protective barrier between the hot chimney pipe and the surrounding insulation or structural materials in an attic or any other space with combustible materials.

Here are some key points about attic insulation shields for chimney pipes:

1. Heat Protection: The primary function of an attic insulation shield is to provide a fire-safe clearance between the hot chimney pipe and any nearby combustible materials. This helps prevent the risk of fires caused by radiant heat transfer to nearby insulation, wooden framing, or other materials in the attic.
2. Material: Attic insulation shields are typically made of non-combustible materials such as sheet metal, stainless steel, or galvanized steel. These materials can withstand high temperatures without igniting.
3. Design: These shields are designed to fit around the chimney pipe and create a gap between the pipe and any surrounding materials. They often have a conical or cylindrical shape to ensure proper ventilation around the chimney while maintaining a safe distance from combustibles.
4. Installation: Attic insulation shields are installed around the chimney pipe in the attic space, creating an air gap that allows for adequate ventilation. Proper installation is crucial to ensure the shield performs its intended function effectively.
5. Building Codes: Compliance with local building codes and safety regulations is essential when installing a chimney and attic insulation shield. These codes often specify the required clearance between the chimney pipe and combustible materials.
6. Compatibility: Ensure that the insulation shield is compatible with the specific chimney pipe and venting system you are using. Different manufacturers may have their own shield designs and requirements.
7. Professional Installation: It's advisable to have a qualified technician or installer handle the installation of the chimney and the attic insulation shield to ensure it meets safety standards and local regulations.

Attic insulation shields play a critical role in preventing fire hazards associated with chimney installations. When properly installed, they help protect your home by ensuring that the heat from the chimney pipe is safely contained and does not pose a threat to nearby combustibles. Always consult with a professional or refer to the manufacturer's guidelines when installing these components to ensure your safety and compliance with local regulations.

---

Specifications:

• Material: High-grade Steel
• Type: Attic Insulation Shield
• Vent Pipe Inner Diameter: 11"
• Vent Pipe Outer Diameter: 13"
• Length: 24"
• Diameter: 17"
• Use: Ducting and Venting
• Easy to install
• Heavy-duty construction
• The ceiling firestop is not included
• Provides a non-combustible barrier between the hot venting pipe and attic insulation
• Designed to work with 11" inner diam. x 13" outer diam. SL1100 and SL400 chimney pipe
• Clearance to combustibles mandated by appliance listing

---

Downloads

• SL1100 AS10 Attic Insulation Shield Installation Manual
• Hearth & Home Technologies Limited Lifetime Warranty

---

Choosing The Perfect Venting System for Your Fireplace

To ensure security, effectiveness, and usefulness, it is crucial to select the ideal venting system for your fireplace. There are several factors to consider when selecting a venting system, including the type of fireplace, fuel source, local building codes, and your personal preferences. Here's a step-by-step guide to help you make the right choice:

Determine the Type of Fireplace:

• Wood-Burning Fireplace: If you have a traditional wood-burning fireplace, you'll need a chimney or venting system designed to handle the combustion byproducts and smoke.
• Gas Fireplace: Gas fireplaces can be vented through either a direct vent or a ventless (vent-free) system. Your choice will depend on local regulations and your heating needs.

Understand Venting Options:

• Chimney: A traditional masonry or metal chimney is suitable for wood-burning fireplaces. Ensure it is in good condition and meets local codes.
• Direct Vent: This system is commonly used for gas fireplaces. It has a sealed combustion chamber and draws fresh air from outside for combustion while expelling exhaust gases outside through a dedicated vent pipe.
• Ventless (Vent-Free): Ventless gas fireplaces don't require a chimney or external venting. They burn gas cleanly and release heat and moisture into the room. However, they are subject to strict regulations in some areas due to air quality concerns.

Check Local Building Codes:

• Before making a decision, check local building codes and regulations. Some areas have strict requirements for venting systems to ensure safety and air quality. Compliance with these codes is crucial.

Consider Efficiency:

• Choose a venting system that maximizes energy efficiency. Direct vent systems are more efficient than traditional chimneys because they minimize heat loss.

Safety Considerations:

• Safety should be a top priority. Ensure that the venting system is correctly installed and maintained to prevent carbon monoxide leaks and other hazards.

Aesthetics and Design:

• The venting system should complement your home's design and aesthetics. It should be as unobtrusive as possible while still performing its function.

Professional Installation:

• It's strongly recommended to have your venting system installed by a qualified professional who is familiar with local codes and regulations.

Maintenance:

• Regular maintenance is essential to keep your venting system working efficiently and safely. Schedule annual inspections and cleanings, especially for wood-burning chimneys.

Budget:

• Consider your budget for both the initial installation and ongoing maintenance. While ventless systems may be cheaper to install initially, they may have higher operating costs due to increased gas consumption.

Environmental Impact:

• If you're concerned about environmental impact, consider the emissions associated with your chosen venting system. Wood-burning fireplaces, for example, can release particulate matter and other pollutants into the air.

Ultimately, your individual circumstances, such as the sort of fireplace you have, your local laws, and your own preferences for aesthetics and efficiency, will determine the ideal venting system for your fireplace. You can make a more informed choice by speaking with our experts at fireplace doors online.

---

A Comprehensive Guide to Buying a Fireplace Venting System

A fireplace venting system is an essential part of your fireplace that makes sure that smoke and combustion byproducts are securely removed from your home while providing a supply of fresh air for burning. Whether you're installing a new fireplace or upgrading an existing one, this comprehensive buyer's guide will help you understand the various venting options and make an informed decision.

1. Types of Fireplace Venting Systems:

There are three main types of fireplace venting systems:

• Chimney Venting: Traditional masonry fireplaces typically have a brick or stone chimney. They rely on natural convection to draw air in and expel smoke out through the chimney. This type of venting is suitable for wood-burning fireplaces.
• Direct Venting: This is a sealed system that draws combustion air from the outside and expels exhaust gases through a vent pipe. Direct vent fireplaces are highly efficient and can be used with various fuel types, including gas and propane.
• Ventless or Vent-Free Venting: These fireplaces do not require a venting system, as they are designed to burn fuel cleanly enough that the combustion byproducts can be safely released into the room. They are typically gas-powered and can be installed almost anywhere.

2. Choosing the Right Type:

• Consider Your Fuel Type: Determine whether you want a wood-burning, gas, or electric fireplace. Your fuel choice will influence the type of venting system you need.
• Efficiency and Convenience: Direct vent and ventless fireplaces are typically more energy-efficient and easier to install than traditional chimneys. Consider your preferences for convenience and energy efficiency.

3. Sizing and Location:

• Calculate Heating Needs: Determine the heating capacity you need based on the size of the room or area you want to heat. This will help you choose an appropriately sized fireplace and venting system.
• Location: Decide where you want to install your fireplace. The location may impact the type of venting system you can use and the venting route.

4. Venting Materials:

• Chimney Materials: If you're using a traditional chimney, consider the type of materials you want for its construction, such as brick, stone, or metal flue liners.
• Vent Pipe Material: For direct vent fireplaces, the vent pipe is typically made of aluminum or stainless steel. Ensure the materials are suitable for your fuel type and meet local building codes.

5. Installation and Safety:

• Professional Installation: Proper installation is crucial for safety and performance. Hire a certified technician or contractor experienced in fireplace venting systems.
• Clearances: Ensure proper clearances to combustibles are maintained as per the manufacturer's guidelines and local building codes.

6. Venting Accessories:

• Termination Caps: These protect the vent opening from weather and pests.
• Chimney Liners: If you have a masonry chimney, consider installing a stainless steel liner to improve efficiency and safety.

7. Maintenance and Cleaning:

• Regular Inspections: Schedule regular inspections and cleaning to ensure your venting system is functioning correctly and free from debris or blockages.

8. Legal and Safety Considerations:

• Local Codes and Regulations: Check with your local authorities to ensure compliance with building codes and regulations regarding fireplace venting.
• Carbon Monoxide Detectors: Install carbon monoxide detectors in your home, especially if you have a gas fireplace.

9. Budget Considerations:

• Initial Cost: Consider both the upfront cost of the fireplace and venting system, as well as the ongoing operating costs (fuel, maintenance, etc.).

10. Aesthetics:

• Design and Style: Choose a venting system that complements your home's aesthetic and blends well with your interior design.

Remember that safety should always be your top priority when selecting and installing a fireplace venting system. Consult with professionals and follow manufacturer guidelines and local regulations to ensure a safe and efficient installation.