FREE SHIPPING ON ALL FIREPLACE DOORS - 100% USA Based Customer Service - CHECK PROMOS NOW!
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Newport Masonry Fireplace Glass Door

     Send us a PHOTO of your fireplace for a FREE quote

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us Before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on) When the enclosure is larger than the opening of the fireplace.
Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the enclosure will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc.) We need the exact minimum height.

 

INSIDE FIT; When the enclosure is smaller than the opening of the fireplace.
When the enclosure is smaller than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc.) We need the exact minimum width.

DO NOT make adjustments to sizes, we need the EXACT OPENING size.

in
in

Size Range For Pricing: Up To 34"W and Up To 32"H

=:

$1,112.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Fabrication Time 6-8 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
Manufacturer DOES NOT provide any warranty on glass! Warranty does not include defects caused by improper use or operation of the fireplace glass door.
Available
+ −
Brand: Portland Willamette
Write a review

The Newport door uses a 3/16" bar iron construction to offer you clean, sleek lines. Fireplace Door is available as either an overlap and inside fit door, You can make the enclosure truly yours with the plentiful option. Choice of glass tint, choice of handle styles and several powder coat finishes. The tempered safety glass used in this glass fireplace door is 3/16” thick.

It takes a bit of know-how to install this fireplace door, it is drilled into the mortar joints of your fireplace so it will be secure against the firebox and won’t come loose with time. Though this contemporary fireplace door doesn’t come with fireplace mesh, you can choose to add it. We highly recommend fireplace mesh as it can go a long way towards keeping your home and loved ones safe from the crackling fire. As always, the fireplace doors we carry are American made and ship free to our U.S. customers!

INSTALL ON MASONRY FIREBOXES ONLY!

Installation: H for Hope You Are Handy!

Yes assembly and drilling will be required to install the Newport fireplace door. 4 straps attach to the frame and the other end will need to be drilled into the mortar joints of your fireplace. All in all not a bad option and this guarantees that enclosure can be installed onto almost any masonry fireplace door.

Newport Masonry Fireplace Door Features Product Features And Benefits:

  • 1-1/2" wide top and bottom, 1-3/4" wide side frame that is 3/16" thick
  • 3/16 steel construction
  • 3/16" tempered safety glass
  • Available as either overlap fit or inside fit door
  • Hinge finish always matches the door stile finish
  • Mounting hardware for your convenience
  • Recessed depths: No Mesh = 1" / Sliding Mesh = 2 1/2" / Gate Mesh = 2 1/4"
  • Proudly made in the USA

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Newport Masonry Fireplace Door Specifications Product Specifications:

  • Fireplace Type: Masonry
  • Door Fit: Overlap | Inside
  • Material: Welded Steel 1-1/2" wide top and bottom, 1-3/4" wide sides x 3/16" thick
  • Approximate Recessed Depth: No Mesh = 1" | Sliding Mesh = 2-1/2" | Gate Mesh = 2-1/4"
  • Approximate Overlap: 3/4"
  • Door Type: Cabinet Doors Full View Glass | Cabinet Doors | Full-Fold Bi-Fold Doors Full View Glass
  • Glass: 3/16" Tempered Safety Glass
  • Glass Tints: Clear | Grey | Bronze
  • Ceramic Glass: N/A
  • Spark Protection: Optional
  • • Damper: N/A
  • Airtight Option: N/A
  • Assembly: Comes Fully Assembled
  • Mounting: Hardware Included

Newport Masonry Fireplace Door Owners Manual Product Manual:

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Add New
Last updated on September 24th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!