Elevate your fireplace experience with the Hargrove 36 Inch Aspen Timbers Vented See-Thru Log Set, featuring an optional burner and valve. These logs authentically replicate the rich, detailed bark and the natural appearance of split logs.
The Aspen Timbers variant showcases elegantly crafted white birch-style logs, complemented by an open view ember bed, creating a captivating and inviting warm ambiance. The creation of this natural-looking gas fireplace log set is marked by intricate attention to detail and masterful craftsmanship, evident in the textured models and the meticulous hand-painting process.
Customize your gas fireplace logs to your precise needs, choosing from various options such as fuel type, size, ignition method, and the convenience of an optional remote control. These ceramic fiber fireplace gas logs not only deliver enhanced heat output compared to refractory concrete or cement logs but also retain their radiant, red-hot glow even after the flames have been extinguished, all while using the same amount of fuel.
Rest assured with the peace of mind offered by a limited lifetime warranty. Hargrove's Timbers Series ceramic fiber logs incorporate Radiant Heat Technology, setting them apart from refractory or concrete logs. Unlike refractory logs that primarily absorb heat, our Timbers Series logs efficiently radiate heat from their heated surfaces into the living space, fully optimizing the heat produced by the flame.
To achieve maximum radiant heat, Hargrove's S-Burner system, while compatible with all Timbers Series logs, excels in producing a substantial flame, thus maximizing radiant heat output.
Enhancing performance further, Radiant Riser and Radiant Glow Bracket components are included in Radiant Heat sets. The U-shaped Radiant Riser forms a heat chamber within the log stack, while the Radiant Glow Bracket, attached to the back of the S-Burner, directs the flame and heat into the heat chamber, thereby maximizing radiant heat production, ensuring a cozy and inviting atmosphere. Upgrade your fireplace with Hargrove's Aspen Timbers log set today.
Verify that the fireplace is approved for solid-fuel burning and constructed with non-combustible materials.
Confirm the operational damper is in place, and the chimney is clear of any obstructions or restrictions.
Ensure that the fireplace has the appropriate draft to accommodate the decorative appliance.
Make sure the fireplace is clean and free from debris or ash.
Check for any obstructions in the fireplace, such as log grates or log lighters, that could hinder the installation of the log set.
In cases where the floor is recessed or glass doors are installed, consider elevating the appliance to ensure proper air circulation.
Refer to the sizing table to determine if the log set is the right fit for the fireplace installation.
Inspect the gas line to ensure it is in safe condition and adequate for the installation.
Verify that the gas line sizing is appropriate for the appliance.
If possible, position the gas line on the right side of the fireplace for a smoother installation process.
Before starting the burner installation, ensure that the gas supply line is turned off for safety.
Ensure that the gas supply is turned off.
Center the burner on the fireplace floor, positioning it directly beneath the flue opening.
Place the grate over the burner in a manner that positions the legs of the grate just outside the perimeter of the burner.
Once the desired positioning is achieved, mark the locations of the burner and grate on the floor of the fireplace as reference points.
Remove the grate to proceed with the gas connection.
Please Note: In cases where the floor is recessed or glass doors are installed, it is essential to elevate the burner using a firebrick or an equivalent material. This elevation is necessary to ensure proper air circulation over the valve systems.
A see-thru fireplace is a captivating feature, offering warmth and beauty to two rooms simultaneously. Sizing your see-thru gas log set correctly is essential for both aesthetic appeal and safety. In this article, we'll guide you through the process of selecting the right gas log set size, considering the clearance from the valve to the firebox wall, and understanding how much smaller the log set should be to ensure a harmonious fireplace experience.
To begin, carefully measure the dimensions of both sides of your see-thru fireplace. Take note of the width, depth, and height of each opening, as these measurements will be the foundation for choosing the correct gas log set size.
Choose the width and height of your gas log set carefully to create symmetry and balance. Ensure the log set fits within the measured dimensions of each side's opening, leaving a small gap for safety and aesthetics.
Depth is another vital dimension. Measure the depth of each fireplace opening and select a log set with logs that fit comfortably within these measurements, allowing room for airflow and ensuring safe use.
When installing a valve for your see-thru gas log set, there are crucial factors to consider:
In addition to the valve, consider the clearance needed for gas fireplace accessories such as safety pilot lights, remote control systems, millivolt systems, and burner systems.
For both the gas log set and the valve, professional installation is highly recommended. Certified technicians can ensure that the logs are correctly positioned and that the gas line is connected safely and securely. They will also verify that the recommended clearance for the valve and gas log set is maintained. Professional installation guarantees the proper functioning of your see-thru gas log set and provides peace of mind.
Selecting the right size for your see-thru gas log set, considering valve placement and ensuring the correct clearance, is essential for creating a safe and aesthetically pleasing fireplace experience. Follow precise measurements, adhere to manufacturer guidelines, and prioritize professional installation for a cozy and inviting ambiance in both living spaces. Remember, safety and aesthetics go hand in hand when it comes to your see-thru fireplace.
Manufacturer's Limited Warranty
Refractory Logs
Hargrove gas logs carry a limited lifetime warranty against any manufactured defect or breakage when installed indoors. A replacement will be available from the dealer at which the appliance was purchased. This warranty does not cover breakage caused by excessive handling once installed and fired. Products installed in outdoor applications carry a one (1) year limited warranty.
Burner & Grate
If the burner or grate fails due to deterioration within five (5) years of the verified purchase date, a free replacement will be made available from the dealer at which the appliance was purchased. Products installed in outdoor applications carry a one (1) year limited warranty.
All Other Parts
If any assembled part should fail to operate or be found defective within two (2) years of the verified purchase date, a replacement will be available from the dealer at which the appliance was purchased. Products installed in outdoor applications carry a one (1) year limited warranty.
WHAT IS NOT COVERED
1. Removal and reinstallation costs.
2. Labor costs for replacement or repairs.
3. Transportation or shipping cost.
4. The cost of a service call to diagnose trouble.
5. Painted Surfaces.
6. Damage or defect caused by improper installation, accident misuse, abuse, or alteration.
7. Replacement of rusted burner or combustion chamber resulting from improper storage of the appliance.
No posts found
Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.