24V Copper Cone Automated Gas Tiki Torch

Our  Copper Cone automated tiki torch gives you the freedom to enjoy its light at the flip of a switch. This beautiful fire feature can be hard wired into your electrical source and natural gas or propane fuel lines for easy start up. The Vulcan Fire Module is equipped with state of the art technology to restart your torch if the flame goes out due to the weather. Enjoy your outside living space even more with the light of the flames reflecting off its beautiful spun copper torch head. This gas tiki torch is capable of producing up to 25,000 BTUs!

Copper Cone Automated Tiki Torch / Natural Gas or Propane. Includes 24 Volt AC Transformer and Install Instructions (Standard Inlet Size: 1/2" FIP / OTHER INLET SIZES AVAILABLE); Length: 14.25", Width: 7 5/8" (Note: Please let us know if you would like your Tiki's powered on TOGETHER or SEPARATELY)

PLEASE NOTE:

• Copper will develop a patina over time when exposed to the elements, darkening the copper and eventually turning it blue-green. This is part of the natural oxidation process of the material.
• BE AWARE THAT saltwater environments like a saltwater pool or even salty air near the ocean can greatly accelerate the patina progression.
• The purer the copper, the more refined and higher the percentage of copper in the product, the faster a patina will form.
• If you wish to keep the copper bright and red, it will need to be sealed with a product like 'ProtestaClear' or 'Eventbrite' to prevent a patina from forming. 
• For removal of the patina, we recommend the simple DIY recipe of 1/2 lemon juice and 1 tablespoon of baking soda mixed together. Using a soft cloth and working in a circular motion, gently scrub the outer surface of your copper product with the solution. Wipe it with a separate clean cloth, then rinse it with lukewarm water. Let air dry to avoid watermarks. A 3rd clean soft cloth can be used to buff the surface when completely dry.

CLICK HERE for Important Information about Tiki Torch Poles!

NOTE ABOUT STAINLESS STEEL:
Stainless steel can be susceptible to surface rust, especially in environments near the ocean or exposed to salt water. The salty environment can break down the protective oxidized layer on the stainless steel, leading to rust formation. This process happens more quickly in saltwater conditions. However, this rusting is easily repairable. Using a Red Scotch-Brite pad, you can clean the stainless steel and restore its original appearance. After cleaning, the stainless steel will resist rusting for a longer period.

Specifications:

• Torch Material: 16 Gauge Spun Copper
• Base Material: Stainless Steel
• High Heat Finish: Black Powder Coat
• Fuel Type: Natural Gas  | Liquid Propane   
• Ignition System: Automated Vulcan Fire Module         
• Ignition System Voltage: 24 VAC
• BTUs: 25,000 Max
• Gas Inlet Size: 1/2 Inch
• Inlet Gas Pressure Limit: 0.5 psi  
• Torch Height: 14  1/4 Inches
• Torch Width: 7  5/8 Inches
• Includes: 24 Volt AC Transformer And Installation Instructions

Downloads:

• Copper Cone Automated Tiki Torch Kit
• Pre-installation Checklist
• Tiki Torch Trouble Shooting Guide