Selkirk 5" Ultra-Temp Adjustable Pitched Ceiling Plate

Selkirk 5" Ultra-Temp Adjustable Pitched Ceiling Plate 5T-PCPAJ elevates your chimney installation with this sleek and versatile accessory. Crafted to deliver a polished aesthetic, it is the perfect finishing touch when your chimney penetrates a sloped ceiling. Its matte black finish adds a touch of modern elegance and seamlessly blends into various home decor styles.
The Pitched Ceiling Plate isn't just about style; it's also about functionality. This adaptable accessory easily adjusts to accommodate multiple ceiling pitches, ensuring a snug and secure fit in any setting. Whether you're looking to enhance the visual appeal of your space or seeking a practical solution for your chimney installation, the Pitched Ceiling Plate has you covered.

Features:

• 304 Stainless Steel Inner Liner
• 430 Stainless Steel Outer Wall
• 1" Solid Pack Mineral Wool Insulation
• All residential fuels
• Adjustable lengths for ease of installation
• Multiple Support Kits available
• 4" Diameter available for tiny homes and recreational applications
• Ultra-Temp and Galva-Temp can be combined to make a complete and cost effective solution
• Smart Choice Warranty on all components

Specifications:

Downloads:

• Ultra-Temp Product Catalog
• Brochure Product Buyers Guide
• Product List Ultra-Temp
• Product Application Guide
• Sizing Chart for Fireplaces
• P Sheet General Installation Instructions
• GS General Installation Instructions
• Installation Instructions Pitched Ceiling Plate

Essential Notice:

The ULTRA-TEMP/GALVA-TEMP Chimney Systems that have been tested to the maximum temperatures required by Underwriters' Laboratories Safety Standard for Factory-Built Chimneys (UL®-103). This encompasses the ULTRA-TEMP® HT/GALVA-TEMP® HT chimney systems.

• Diameter Sizes: Offered in 4" (UT), 5", 6", 7" & 8".
• Part Identification: The parts are identified by the abbreviations UT and GT.
• Clearances: Chimney systems must maintain a minimum of 2" clearance of airspace from combustible materials
• Listing: The chimney system is certified by UL 103 Type HT.
• Temperature Ratings: The systems have been tested to withstand a maximum temperature of 2100°F for 10 minutes, 1400°F for 60 minutes, and can operate continuously at a maximum temperature of 1000°F.

The Selkirk Chimney System (SCS) is designed to be an optimum choice for venting residential heating appliances that use fuels like wood, #2 oil, and both natural and LP gas. The SCS is particularly adapted for the latest, high-efficiency airtight wood stoves. It is intended for use with gravity (natural draft) and nonpositive internal pressure venting only.
If it is needed for use with an appliance having a power burner like an oil furnace, it can perform effectively, provided the appliance functions with neutral or negative draft at the outlet. However, non-residential appliances that may lead to positive pressure within the chimney are recommended to use a Selkirk Commercial Model PS or IPS system.

FRAMEWORK / SUPPORT STRUCTURES:

Selkirk Support Structures are precisely engineered with the capability to handle up to four times their maximum specified system weight at its maximum allowed height.

• * Framing dimensions may exceed the given values by a maximum of 1/2", but they should not be lesser than the stated numbers. Please verify the support dimensions before application.
• ** The 4" chimney has received approval for usage at its provided clearance by the Ceiling Support.

Support Table

Important:

• You can suspend up to 20 feet of chimney under a roof support with all joints tightened and stabilized using locking bands or screws (Option A).
• Kindly note that sloped ceilings and roofs will not have a square opening, instead, they should maintain a 2" opening.
• The specified guidelines are applicable only to flat roof and/or ceiling penetrations. The maximum support for a 4" component is 50 feet. This includes Ceiling Supports (BCS, LCS, and CSG), Wall Support (WS), Roof Support (RS), and Anchor Plate (AP).

Chimney Height Above Roof Guidelines:

Rule 1: The section of the chimney that meets the roof must rise a minimum of 3 feet above the roof's highest point.
Rule 2: Any segment of the chimney within 10 feet horizontally from a roof structure or surface must extend at least 2 feet above.