FREE SHIPPING ON ALL FIREPLACE DOORS - CHECK OUT OUR PROMOTIONS
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Newport Brass Layered Saratoga Masonry Fireplace Glass Door

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in

Size Range For Pricing: Up To 32"W and Up To 34"H

=:

$2,337.00
Short description:

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 4-6 Weeks Question | Why Buy From Us?

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
Z-tabs welded on to main frame are an optional method of mounting when lintel clamps are not applicable. Flanges are recommended for rough or irregular fireplaces!
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to [email protected].
Available
+

The trendy Saratoga custom fireplace door is a bold and beautiful accent for your masonry fireplace! Overlap or inside fit choices are available for this interesting enclosure with cabinet style doors. The 7 gauge steel main frame rests behind an aluminum door frame, which holds the glass securely in place. Both components are available in your choice of powder coat or overlay finishes. You can also choose one of three glass tints that you feel will best compliment your color choices for this modern fireplace door. You'll get the best line of defense between the fire and your home with our tight-weave cabinet mesh (hanging spark protection is an upgrade). The Saratoga comes without a damper, but can be customized with a hidden element instead. Let us help you establish your hearth position by uploading a picture of your fireplace. Mounting hardware is included for a simple installation. This masonry fireplace door features expertly concealed hinges, while the 3/4 inch depth between the two frames takes the place of handles and allows you to easily open and close the cabinet doors. You are going to love the panache it adds to your home!


Saratoga Masonry Fireplace Door Features and Benefits Product Features and Benefits:

  • The Saratoga door is for masonry applications ONLY
  • Fireplace door ships for free; please allow 4 to 6 weeks for production
  • 5 year warranty on workmanship and material only; 1 year glass warranty
  • Customize as an overlap or inside fit frame, with or without a damper
  • 5 inch wide by 3/16 inch deep main frame is made from 7 gauge flat steel
  • 4 inch wide cabinet doors are crafted from durable aluminum
  • Check out the videos for available finish colors
  • 1/4 inch tempered glass comes in grey, bronze, or clear glass
  • 3/4 inch depth between doors and main frame allow for easy opening and closing without handles
  • Cabinet mesh is optional; alternative styles available
  • Door comes fully assembled with included mounting hardware

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Saratoga Masonry Fireplace Door Specificaitons Product Specifications:

  • Door Fit: Overlap | Inside
  • Approximate Overlap: 4.5" if 5" Wide Main Frame Is Selected
  • Door Type: Cabinet Doors
  • Main Frame Material: 5" Wide Frame Panel x 3/16" Deep 7 Gauge Flat Steel
  • Door Frame Material: 4" Wide Aluminum
  • Glass: 1/4" Tempered Safety Glass (1 year warranty)
  • Glass Tint: Grey | Clear | Bronze
  • Ceramic Glass: N/A
  • Mesh Protection: Optional
  • Airtight Option: N/A
  • Damper: Available
  • Mounting: Hardware Included

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
     1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
    1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
   1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
    2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
   2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
   2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
   2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
    If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on January 2nd 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!