$927.00
The EPK-2V-TR is a 110 volt powered electronic gas control valve from RH Peterson Real Fyre. It features a non-standing pilot system designed for installation outside your firebox. This remote controlled fireplace gas valve control kit will shut down when the unit is turned off. The transmitter allows for on/off operation, convenient flame height adjustment, and a timer mode, and it communicates with a receiver that is built into the module. Designed only for the vented Real Fyre burners listed in the specs below. Compatible with propane for an output of 180,000 BTUs. Adapter plug and mounting brackets are included. Please Note: For use only with specified Real Fyre vented burner systems. Vented burners must be used in a fireplace that is vented from the firebox through the chimney. The fireplace damper must be kept open during use to allow for appropriate airflow. For your safety, the burner pan and valve must be assembled by a certified gas professional. Product Specifications: Ignition: Electronic Operation: Manual Switch | Remote Control AT-12V-1 Remote: On/Off Operation | Hi/Lo Flame Adjustment | Timer Mode Pilot: Non-Standing Intermittent Pilot Flame Control: Variable Flame Height Fuel: Liquid Propane BTU Volume: Standard Capacity BTUs: 180,000 LP Certification: CSA Certified Included Features: 110 AC Transformer | Built-in Receiver | Mounting Bracket Recommended Real Fyre Vented Burners: G4 | G45 | PB | P45 (12-42" NG | 12-60" LP) Recommended Real Fyre See Thru Burners: G45-2 (16/19" to 2-30" NG | 16/19" to 2-60" LP) Warranty: 1 Year (see warranty tab for more details) Product Manual: EPK-2V-TR Electronic Pilot Kit with AT-12V-1 Transmitter .