$509.40
Our Real Fyre standing pilot gas valve for fireplaces and log sets allows you to operate the system manually with the On/Off switch or by remote control. Adjust the height of the flame conveniently from where you are sitting in your living space! The sleek, low profile design includes an aluminum body with a triple heat shield, along with an angled coupling to elevate the gas log valve, allowing for easier installation and operation! With a temperature rating of 175° and a generous 2 year warranty, this product is a terrific investment. This standard capacity valve is designed for use with Real Fyre vented gas fireplace burners G4, G45, PB, or P45. Natural gas applications produce 115,000 BTUs. Please Note: For use only with specified Real Fyre vented burner systems listed in the specs below. Vented burners must be used in a fireplace that is vented from the firebox through the chimney. The fireplace damper must be kept open during use to allow for appropriate air flow. For your safety, the burner pan and valve must be assembled by a certified gas professional. Product Specifications: Operation: Manual Knob | Remote Control VR-1A Remote: On/Off | Variable Flame Height Remote Battery: 12 Volt (1 - included) Receiver Batteries: AA (4 - included) Pilot: Standing Safety Pilot Flame Control: Variable Flame Height Temperature Rating: 175º Fuel: Natural Gas BTU Volume: Standard BTUs: 100,000 NG | 200,000 LP Certification: CSA Certified Recommended Real Fyre Vented Burners: G4 | G45 | PB | P45 (12-42" NG | 12-60" LP) Recommended Real Fyre See Thru Burners: G45-2 (16/19" to 2-30" NG | 16/19" to 2-60" LP) Warranty: 2 Years (see warranty tab for more details) Product Manuals: APK-17 Standing Pilot Kit with Variable Flame Height | Heat Shield Manual | IMPORTANT Heat Shield Notice | VR-1A Remote Manual .