Real Fyre APK-10 High Capacity Standing Pilot Gas Valve with Remote

The APK-10 standing pilot gas valve for fireplace vented burners by RH Peterson Real Fyre features both manual and remote control for easy operation. This is an On/Off system only. Conveniently start your burner from anywhere in the room with the help of the RR-1A remote. The APK-10 is compatible with natural gas log sets; however, an orifice is provided if converting to propane use. The higher BTU volume allows you to use this with larger applications and log sets. The pilot runs continuously for easy ignition. The unit carries a temperature rating of 175° and delivers up to 230,000 BTUs with natural gas and up to 469,000 BTUs with propane. Hardwire this kit to the optional WS-1 wall switch! It comes with a 15 foot wire harness and a rocker switch for easy operation.

Please Note: For use only with specified Real Fyre vented burner systems listed in the specs below. Vented burners must be used in a fireplace that is vented from the firebox through the chimney. The fireplace damper must be kept open during use to allow for appropriate air flow. For your safety, the burner pan and valve must be assembled by a certified gas professional.

 Specifications:

• Operation: Manual Switch | Remote Control | Wall Switch (optional)
• RR-1A Remote: On/Off Control
• Remote Battery: 12 Volt (1 - included)
• Receiver Batteries: AA  (4 - included)
• Pilot: Standing Safety Pilot
• Flame Control: Non-Variable
• Temperature Rating: 175º
• Fuel: Natural Gas | Liquid Propane
• BTU Volume: High Capacity
• BTUs: 230,000 NG | 372,000 LP
• Certification: CSA Certified
• Optional: WS-1 Wall Switch
• Recommended Real Fyre Vented Burners: G4 | G45 | PB | P45 (12-60" NG | LP)
• Recommended Real Fyre See Thru Burners: G45-2 (16/19" to 2-60" NG | 16/19" to 2-60" LP)
• Warranty: 1 Year (see warranty tab for more details)

 Product Manuals: APK-10 Standing Pilot Kit | RR-1A Remote Manual