$137.68
Metal-Fab 8" x 12" Air-Cooled Temp/Guard Stainless Chimney Pipe 8ATG12 go through extensive testing and follow UL 103HT guidelines, ensuring their suitability for continuous operating temperatures of up to 1000°F and intermittent temperatures reaching 2100°F. This dedication to reliability and security sets Temp/Guard apart as a reliable choice for a variety of applications. One of the standout features of Air-Cooled Temp/Guard is its innovative twist-lock connection system, eliminating the need for sheet metal screws. This not only streamlines the installation process but also contributes to proper joint alignment, enhancing the overall efficiency and durability of the chimney system. This user-friendly design reflects Temp/Guard's dedication to providing a hassle-free experience for installers and end-users alike. Air-Cooled Temp/Guard employs advanced ceramic fiber blanket insulation, a crucial element that addresses common issues such as "hot spots" and insulation settling during transportation and installation. This insulation technology not only enhances safety by preventing potential hazards but also promotes the longevity and reliability of the product. In terms of clearance to combustibles, Air-Cooled Temp/Guard factory-built chimneys boast an industry-leading 2" clearance, the smallest in the market. This reduced clearance significantly minimizes the chimney system footprint, translating to cost savings and time efficiency during installation. By offering this cutting-edge solution, Temp/Guard underscores its commitment to providing a space-efficient and cost-effective chimney system without sacrificing effectiveness or safety. In summary, Air-Cooled Temp/Guard® All-fuel products with diameters 8"-16" are not just compliant with industry standards but go above and beyond to guarantee optimum functionality, security, and simplicity of installation. With features such as the twist-lock connection and innovative insulation technology, Air-Cooled Temp/Guard stands as a trusted choice for those seeking a high-quality, reliable chimney system that excels in both function and efficiency. Features: Approved for most fuel types Stainless steel inner wall UL Listed for 2" clearance to combustibles on 8", 10", 12", 14" and 16" Diameters Double Wall Factory-Built Chimney for use with masonry fireplaces which burn wood, oil, coal or gas Cost-effective alternative for pre-fabricated masonry chimneys Clean, smooth exterior finish Specification: Inner Diameter: 8-Inch Outer Diameter: 11-Inch Lenght: 12-Inch Vent Construction: Double Wall Material: Stainless Steel | Aluminum Fuel Type: Coal, Gas, Oil, Wood UL Listing Number: UL 103 HT Product Type: Chimney Pipe Downloads: All-Fuel Chimney and Black Stove Pipe Brochure TempGuard All-Fuel Chimney Warranty Metal-Fab Temp/Guard® Double Wall Insulated Chimney Systems Metal-Fab's Temp/Guard® Chimney Systems redefine the standards for safety, efficiency, and ease of installation in the realm of factory-built chimneys. Designed for versatility, the Temp/Guard® model TG is an all-fuel chimney system compatible with a wide array of heating appliances, including those powered by wood, coal, oil, gas, or propane. This makes it an ideal choice for a diverse range of applications, adhering strictly to key industry standards such as NFPA 211, BOCA National Mechanical Code, Standard Mechanical Code, and the Uniform Mechanical Code. The Temp/Guard® series stands out for its robust construction and advanced features. Each chimney is tested and listed to UL 103HT standards, affirming their capability to withstand continuous operating temperatures up to 1000°F and intermittent temperatures up to 2100°F. The innovative twist-lock connection system is a hallmark of Temp/Guard®, eliminating the need for conventional sheet metal screws and facilitating correct joint alignment. This feature not only streamlines the installation process but also enhances the structural integrity and performance of the chimney. A key component of the Temp/Guard® system is its ceramic fiber blanket insulation. This material is specifically chosen for its ability to significantly reduce thermal "hot spots" and to maintain its form and insulating properties during transportation and installation, thus preventing any settling of the insulation. This commitment to quality ensures the long-term safety and reliability of the chimney system. Metal-Fab's dedication to safety and efficiency is further evidenced by the exceptionally low clearance to combustibles required for Temp/Guard® chimneys. With a minimum clearance of just 1.5 inches for diameters between 6 and 8 inches, these chimneys offer unparalleled installation flexibility and safety, significantly reducing the risk of heat transfer to nearby flammable materials. The construction of Temp/Guard® chimneys incorporates high-quality materials to ensure durability and performance. The flue is made from 0.015-inch-thick 430 stainless steel, chosen for its resistance to high temperatures and corrosive conditions. The outer casing is available in both galvanized and stainless steel, providing additional protection and longevity to the chimney system. Metal-Fab's Temp/Guard® Double Wall Insulated Chimney Systems are not just about meeting the basic requirements; they are about exceeding expectations and setting new benchmarks in the industry. Whether for residential or commercial applications, Temp/Guard® offers a reliable, efficient, and cost-effective solution for modern heating needs. Frequently Asked Questions about Metal-Fab Temp/Guard® Double Wall Insulated Chimney Systems Q: Can Temp/Guard® Chimney Systems be used with any type of fuel? A: Yes, Temp/Guard® Chimney Systems are designed as all-fuel chimneys, making them suitable for use with wood, coal, oil, gas, or propane-fired appliances. They are versatile and can accommodate a wide range of heating requirements. Q: What are the temperature capabilities of Temp/Guard® Chimneys? A: Temp/Guard® Chimneys are tested and listed to UL 103HT standards, capable of handling continuous operating temperatures up to 1000°F and intermittent temperatures up to 2100°F. This makes them suitable for high-temperature applications. Q: What makes the twist-lock connection system in Temp/Guard® Chimneys unique? A: The twist-lock connection system eliminates the need for sheet metal screws, simplifying the installation process and ensuring proper joint alignment. This feature enhances the chimney's structural integrity and performance. Q: How does the ceramic fiber blanket insulation in Temp/Guard® Chimneys improve safety and reliability? A: The ceramic fiber blanket insulation is designed to reduce thermal "hot spots" and prevent insulation settling during transportation and installation. This maintains the chimney's insulating properties and structural reliability, increasing safety and longevity. Q: What is the clearance to combustibles for Temp/Guard® Chimneys? A: Temp/Guard® Chimneys boast the smallest clearance to combustibles in the industry at just 1.5 inches for diameters between 6 and 8 inches. This reduced clearance enhances safety and allows for more flexible installation options. Q: Are Temp/Guard® Chimneys compliant with industry standards? A: Yes, Temp/Guard® Chimneys comply with NFPA 211, BOCA National Mechanical Code, Standard Mechanical Code, and the Uniform Mechanical Code. This ensures they meet strict safety and performance criteria. Q: What materials are used in the construction of Temp/Guard® Chimneys? A: The flue material is made from 0.015-inch-thick 430 stainless steel, and the casing is available in both galvanized and stainless steel options. These materials are chosen for their durability and resistance to high temperatures and corrosive conditions. Q: Can Temp/Guard® Chimneys be installed in tight spaces? A: Yes, thanks to the minimal clearance requirement of 1.5 inches to combustibles, Temp/Guard® Chimneys can be installed in tighter spaces than many traditional chimneys, making them ideal for installations where space is limited. Q: How does Temp/Guard® ensure proper alignment during installation? A: The twist-lock connection system not only simplifies the installation process but also ensures that each joint is properly aligned. This contributes to the overall integrity and safety of the chimney system. Q: Where can I find a certified installer for Temp/Guard® Chimney Systems? A: It's recommended to contact Metal-Fab directly or visit their website for a list of certified installers and distributors who are trained and familiar with Temp/Guard® Chimney Systems to ensure proper installation and compliance with warranty requirements. .