$207.87
This Hearth Product Controls TRX-11 Series Fireplace Remote Control Kit works with gas fireplaces, log sets, and inserts outfitted with a Millivolt or 24 volt Direct Spark Ignition (DSI) gas valve system. The kit includes the remote, a receiver box, faceplate, and instruction manual. The hand held, seven button ultra sonic remote control transmits a signal to the receiver box from a distance up to 20 feet. It has a built in sensor that will automatically control the room temperature. The receiver box can be installed in two different ways. It can be installed in the compartment for the gas control in your fireplace or it can be wall mounted. The receiver box also has a sliding control switch that can control the ignition of the fireplace separate from the remote and acts as a child safety feature. The remote also features a child safety, key pad lock feature. This fireplace remote control can operate in two different modes: manual mode and auto mode. The manual mode uses either the remote buttons or receiver box switch to turn the fireplace on and off. The auto mode allows the user to set the desired temperature level to one of 6 settings. This will automatically turn the fireplace on and off to adjust to the set comfort level. Please note: This gas fireplace remote control is compatible with the following millivolt kits: MVKN, MVK-P, MVK-NQM, MVK-PQM, UMVK-NP, MVK-EI, and MVK-HC. Specifications: Remote Screen Type: N/A Remote Batteries: 9 Volt Receiver Box Compatibility: Millivolt Kits / 24 Direct Spark Ignition Volt System Receiver Box Operation: Manual / Thermostat Receiver Batteries: 9 Volt Batteries Included: No Childproof Safety Feature: Yes Flame Height Adjustment: No Includes: Remote | Receiver Box | Faceplate | Instruction Manual Product Manual: HPC TRX 25 Remote Instructions .