FREE SHIPPING ON ALL FIREPLACE DOORS - CHECK OUT OUR PROMOTIONS
100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

Rectangular On/Off Electronic Fire Pit Ignition - 90" x 16"

Starting at:
$5,373.42
Short description:

   Free Shipping NOT Available | Fabrication Time 4-6 Weeks

Available
+

Our 90 inch rectangular fire pit insert is equipped with an electronic ignition that will start your fire with a simple push of a button! Watch as the hot surface ignition creates a full "wall" of flames that rises from the precision-drilled holes as the thermocouple technology constantly monitors your safety by running continuous checks on the internal temperature of the system. The rectangular fire pit insert is made from durable stainless steel, and is 90 inches long, 16 inches wide, 2-1/2 inches deep, and is completed by the 84 inch x 10 inch H-Burner that heats up to 350,000 BTUs.

This burner system now includes a hot surface ignition to keep this fully automated electronic system lit through any windy gale or surprise rainstorm. The burner and pan are all made of marine grade, 304 stainless steel. The drilled ports or holes are staggered to create a more realistic flame. The holes are drilled instead of punched to prevent whistling. The center hub of the H-burner is raised up at an angle so that all water and moisture will roll down and away from the ports, preventing water from getting into the gas lines. Small openings in the burner pan called weep holes also help to drain water out. If using lava rock as your fire media, it is best to keep it covered to prevent moisture from getting into the porous rocks. Or wait until they are thoroughly dry before turning on the fire pit. The rapid expansion of heat and steam inside the lava rocks could cause them to crack, pop, or, worst case scenario, explode.

This steel fire pit insert is compatible with both natural gas or liquid propane, includes 24 inch flex line, and is recommended with the use of 188 pounds of fire glass or 2 cubic feet of lava rock. 

Please Note: 

  • Be sure to make proper accommodations for clearance around the fire pit.
  • Additional parts needed for assembly include a hard pipe, fittings, and an enclosure with an access door for the gas valve. 
  • Warping of the pan lip is common when the unit is hot. This can cause the lip to not sit flat against the surface. Recessing the lip below the surface of the fire pit will help to hide this. 
  • NOTE: 24vac Model requires SEBCO 24vac, 100W Power Supply
  • Pan Dimensions: Width: 16" (not including 1.3" lip) | Length: 90" | Depth: 2 1/2"
  • Burner Size & Shape: 84 Inch x 10 Inch, H-Burner
  • Materials: 304 Grade Stainless Steel
  • BTU 's: 350,000
  • Fuel: Natural Gas | Liquid Propane
  • Ignition: Electronic 
  • Voltage: 120 VAC, GFCI Outlet
  • Operation: Push Button
  • Assembly: Fully Assembled
  • Includes: 24 Inch Gas Input Flex Line | Installation Instructions
  • Certification: 2018 ANSI Z21.97, CSA 2.41 in USA and Canada
  • Optional Fire Media: 2 cubic feet of lava rock | 118 lbs of fire glass
  • NOTE: 24vac Model requires SEBCO 24vac, 100W Power Supply

Manufacturer's Warranty

1) Stainless Steel Fire Pit and Outdoor Fireplace Burners - Lifetime Warranty

Limited Warranty:
2) Electronics, Gas Valve: Commercial-1 year; Residential-3 year.
3) Pilot Assembly: Commercial-1 year; Residential-2 year.
4) Stainless Steel Pan, Valve Box: Commercial-1 year; Residential-5 years

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Last updated on January 26th 2024.

 

 

Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!