FREE SHIPPING ON ALL FIREPLACE DOORS - CHECK OUT OUR PROMOTIONS

100% secure

online shopping

FREE SHIPPING

On all orders!

Continental US

Phone Hours

Mon - Fri: 9:00am - 6:00pm EST

814-723-9394

HomeMasonry Fireplace DoorsAir Sealed DoorsCascade Air Sealed Masonry Fireplace Door With Ceramic Glass Option

12 of 34

Cascade Air Sealed Ceramic Glass Masonry Fireplace Door

Cascade Air Sealed Masonry Fireplace Door with Arched Door and Window Pane With Ceramic Glass

Cascade Air Sealed Masonry Arched Door With Ceramic Glass Window Pane

Cascade Air Sealed Fireplace Door With Ceramic Glass Option

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

DO NOT make adjustments to sizes, we need the EXACT OPENING size

Width in

Height in

Size Range For Pricing: Up To 38"W and Up To 36"H

$1,779.00

Short description:

Free Shipping | Ships in 5-6 Weeks | Why Buy From Us?

Select Finish :

Main Frame Width :

Select Decorative Door Design :

Choose your color and type of glass :

Cabinet Doors With Center Bar :

Select Handle :

Handle Position :

Select Spark Protection :

Select Damper Assembly :

Install Option :

INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.

Hearth Position :

Easy Mounting With Pressure Screws :

Z-tabs welded on to main frame are an optional method of mounting when lintel clamps are not applicable. Flanges are recommended for rough or irregular fireplaces!

I UNDERSTAND DOOR WILL BE FABRICATED ACCORDING TO CUSTOMERS SUPPLIED INSTALL OPTION - non-returnable, and unable to be canceled once in production! :

I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.

Include a photo of your fireplace with your order. If you can't attach it here, email it to [email protected]. :

UPLOAD YOUR PICTURE HERE - NEEDED TO PLACE ORDER

If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to [email protected].

Availability : Available

Quantity:

+ −

Add To Cart

Brand: Custom Metal Company

Write a review

Description
Tech Specs
Documents
Warranty
Customer Photos
Reviews
FAQ

The Cascade air sealed fireplace door does double duty! The gasket around the door frame and window panels keep indoor air from escaping up the chimney, while the optional ceramic glass allows you to burn a fire with the doors closed. Experience more heat from your fireplace thanks to the optional high temperature pyroceram panels that radiate warmth into your living space. Cabinet doors with a center bar hold the amber tinted glass in place. You can choose if you want a damper to regulate the airflow or not. Made from 3/16 thick steel and available in several finishes. Choose one of three different handle styles for this overlap or inside fit fireplace door. Fireplace Doors Online will ships this enclosure for free!

Product Features:

5 year warranty on workmanship and material only; 1 year glass warranty
Air sealed door available only as an overlap or inside fit
Heavy steel frame is 2 inches wide and 3/16 inch deep
Frame can be custom finished in your choice of powder coat or overlay colors
Ceramic glass optional, allows you to enjoy a fire with the doors closed
No damper or hidden damper options
Cabinet doors feature a center sealing bar and gasket around the door frame and glass
Choose from 3 different handle styles
Mesh protection is optional and you can pick from different styles
Door comes fully assembled with included mounting hardware

There are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Product Specifications:

Door Fit: Overlap | Inside
Door Type: Cabinet Center Bar Doors
Material: 2" Wide x 3/16" Deep 7 Gauge Flat Steel Frame
Approximate Overlap: 3/4"
Glass: Bronze | Clear / Grey
Ceramic Glass: Optional
Spark Protection: Cabinet Mesh Optional
Draft Assembly: Optional
Air Sealed Option: Yes
Assembly: Fully Assembled
Handle Style: Square | Wire | Contemporary
Mounting: Hardware Included

Product Manual:

Manufacturer's Warranty

Limited 5 Year Warranty

Warrantied Products: Fireplace Doors, Heating Solutions, Freestanding Screens, Hanging Mesh Kits, Toolsets, Hearth Centers, Log Rings & Holders, Firepits, Wood Racks, and Fireplace Hoods.

Manufacturer hereby warrants these products to be free from defects in materials and/or workmanship, for the period of time and under the conditions described in each section below, subject to the limitations listed below (see section 2).

1. Limited Warranties
1a. Manufacturer warrants the metal/steel materials and the applied finish of this product, to be free from defects in materials and/or workmanship, for a period of five (5) years, subject to the limitations outlined below (see section 2). Color finishes may vary slightly in shade and are not guaranteed to perfectly match or coordinate. Finishes deemed to be significantly varied may be re-finished solely at Manufacturers option and discretion.
1b. Manufacturer warrants any glass materials of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the limitations outlined below (see section 2).
1c. Manufacturer warrants any electrical components of this product to be free from defects in materials and/or workmanship, for a period of one (1) year, subject to the following limitations, and those outlined below (see section 2). Exposing this product to flames and/or heat without engaging the blower unit will void your warranty.

2. Limitations
2a .The repair or replacement of parts, or the performance of service under this warranty, does not extend the life of this warranty beyond its original expiration date.
2b. This warranty is non-transferable and is offered exclusively for the benefit of the original purchaser, beginning on the original date of retail sale.
2c. Manufacturer does not warrant this product against the following: 1. Damage occurring during transportation or installation, damage resulting from improper installation, accident, alteration, or mis-use. 2. Discoloration of finish, distortion of metal parts, and or/glass breakage due to high heat.
2d. Manufacturer is not responsible for any additional charges that may occur during the warranty process, nor are they responsible for any travel, labor, or installation expenses.

3. Warranty Process
If, during the given warranty periods, a product covered under this warranty proves to be defective in material or workmanship, a claim for warranty service should be made through your authorized Manufacturer Dealer. Proof of purchase will be required. The authorized dealer will contact Manufacturer to procure replacement parts and/or if additional service is deemed necessary. Manufacturer reserves the right to choose at its option, the best method of repair or replacement, for any warrantied part or product.