$205.20
Our square stainless steel chimney caps are a long-lasting and economical option for all kinds of fuel as well as coastal areas. The exterior mounting structure offers maximum free air space and better design, while the 100% 304 stainless steel building is designed to resist the toughest circumstances. Made with a 24 gauge stainless steel hood with scalloped corners, 18 gauge 5/8-in expanded stainless steel mesh, and 16 gauge stainless steel base flanges and slotted hex-head bolts. 1/8" thick weld nuts are welded to the frame so screws do not strip out and go in straight. 7” minimum required between flue tiles (overhang is 3.5”). Lifetime warranty for Stainless Steel Caps A screwdriver is all you need 1/8" thick welded nuts provide a secure attachment to the chimney 24 Gauge Material thickness for higher strength 18 Gauge screen for added durability Use Outside Dimensions: Width (from-to) 7” – 9.25", Length (from-to) 11” – 13.5” These stainless models come with a lifetime warranty against rust and manufacturers defects. Full 8" in height to minimize flue restrictions that might causes back smoking .