$1,340.00
The 17 inch Rasmussen Chillbuster CoalFire Classic ventless coal basket grate can be used in just about any fireplace as long as the damper is closed, but it was designed with small, shallow fireboxes in mind with its 9-1/2 inch depth. The Classic coal basket grate uses vertical lines to give your coals a traditional look. Turn your fireplace into a supplemental heat source with the coals made from the refractory cement, which will continue to radiate heat after the fire has been turned off. Choose from our 10 different control options to give you the exact gas coal basket that you want whether it be manual, a variable flame remote, or a wireless wall switch. Standard with this ventless fireplace coal basket is a grate, refractory "coal pieces," and heating unit! This unit can be used on natural gas or liquid propane fireplaces! You can install the CoalFire in a vent-free, vented and in reduced vent installations. Product Specifications: Material: Refractory Cement Basket Width: 16-7/8 Inch Basket Depth: 9-1/2 Inch Basket Height: 9-1/4 Inch Back Plate Height: 13-5/8 Inch Burner Width: 13 Inch BTU's: 30,000 Certification: Vent-Free ANSI Z21.11.2 And Vented ANSI Z21.60 VALVES & CONTROLS: All Controls: Come with standing pilots M Controls: Turn knob to light burner and adjust flame height. Not upgradeable SE Controls: Latching solenoid system controls the ON/OFF of the burner(s) with the included receiver wall switch or optional wireless remote RE Control: Has a motor drive for remote flame height adjustment. Includes hand-held remote transmitter S Millivolt Controls: Includes wired wall switch and is remote ready. The flame height can be adjusted manually at the control valve. Product Features: Available as a natural gas or propane gas coal burner for indoor fireboxes ONLY Ignition control options include: (M) Manual Control Standing Pilot (SE) Remote Ready "EASY" Control Standing Pilot (S) Millivolt Remote Standing Pilot (RE) Variable Flame Remote Standing Pilot Certified for both vent-free (ANSI Z21.11.2) and vented (ANSI Z21.60) standards, so CoalFire can be used in vent-free, vented and reduced vent installations. SOMETHING TO CONSIDER BEFORE YOU PURCHASE A VENTFREE APPLIANCE: Vent-Free sets are supplemental zone heaters - They are not intended for continuous use or whole house heating. Glass doors must be wide open when burning for proper ventilation, proper combustion and cooling of safety controls. With adequate combustion and ventilation air, the damper may be closed for vent-free use. The damper may be opened slightly for reduced venting. Check local codes and ordinances for permitted uses. In Most Cases, Vent Free Appliances Are NOT Approved For Bedrooms Or Bathrooms. Select States And/Or Counties Within States May Not Allow Installation Of Vent Free Products. This includes but is not limited to: California, Minnesota, Wisconsin. Other states may have local restrictions such as Arizona, Nevada, Idaho, Alaska, Wyoming, New Mexico, North Dakota and South Dakota. Please check local codes before purchasing a Vent Free Appliance. Ventfree Products Are Not Suitable For People With Allergies Or Breathing Problems Product Manuals: Owner's Manual .