$865.00

Find Out More

Description

Make that old Victorian fireplace an enjoyable feature once again with the 17 inch wide Rasmussen Chillbuster CoalFire Burner. This vent free gas coal burner is without a fireplace coal basket, so you can use your own or go without one. Designed to fit small, shallow depth, coal and wood burning fireplaces, the CoalFire will upgrade an old fireplace into supplemental heat and make it usable again without going through expensive relining or reconstruction. The coals are made from refractory materials that have no potentially harmful ceramic fiber. Turn the valve knob to light the main burner for on and off flame controls and some minimal flame height adjustment. You can have this with or without a remote. There is also a thermostat option, where you can upgrade to a more specific temperature control this with a hand held remote.  Or, you can upgrade to a Variable Flame Height Remote, which will give better control to the flame height with the hand-held wireless remote. This item is the coal BURNER only. Does NOT include decorative gas coal basket or grate. You can install the CoalFire in a vent-free, vented and in reduced vent installations.  Product Specifications: Material: Refractory  Burner Width: 16-1/2 Inches  Burner Depth: 7 Inches Burner Height: 6-5/8 Inches  Overall Height With Coal: 10-1/2 Inches  Weight: 19-21 Pounds  BTU's: 40,000 Certification: Vent-Free ANSI Z21.11.2 And Vented ANSI Z21.60 Absolute Minimum Fireplace Depth Required Is 6.5 Inch BURNER ONLY VALVES & CONTROLS: All Controls: Come with standing pilots M Controls: Turn knob to light burner and adjust flame height. Not upgradeable SE Controls:  Latching solenoid system controls the ON/OFF of the burner(s) with the included receiver wall switch or optional wireless remote RE Control: Has a motor drive for remote flame height adjustment. Includes hand-held remote transmitter S Millivolt Controls: Includes wired wall switch and is remote ready. The flame height can be adjusted manually at the control valve.  Product Features: Available as a natural gas or propane gas coal burner for indoor fireboxes ONLY  Ignition control options include: (M) Manual Control Standing Pilot (SE) Remote Ready "EASY" Control Standing Pilot (S) Millivolt Remote Standing Pilot  (RE) Variable Flame Remote Standing Pilot Certified for both vent-free (ANSI Z21.11.2) and vented (ANSI Z21.60) standards, so CoalFire can be used in vent-free, vented and reduced vent installations. SOMETHING TO CONSIDER BEFORE YOU PURCHASE A VENTFREE APPLIANCE: Vent-Free sets are supplemental zone heaters - They are not intended for continuous use or whole house heating. Glass doors must be wide open when burning for proper ventilation, proper combustion and cooling of safety controls. With adequate combustion and ventilation air, the damper may be closed for vent-free use. The damper may be opened slightly for reduced venting. Check local codes and ordinances for permitted uses. In Most Cases, Vent Free Appliances Are NOT Approved For Bedrooms Or Bathrooms.  Select States And/Or Counties Within States May Not Allow Installation Of Vent Free Products.  This includes but is not limited to: California, Minnesota, Wisconsin.  Other states may have local restrictions such as Arizona, Nevada, Idaho, Alaska, Wyoming, New Mexico, North Dakota and South Dakota. Please check local codes before purchasing a Vent Free Appliance.  Ventfree Products Are Not Suitable For People With Allergies Or Breathing Problems  Product Manuals: Owner's Manual .