100% secure
online shopping
FREE SHIPPING
On all orders!  
Continental US
Phone Hours
Mon - Fri: 9:00am - 6:00pm EST

12 Inch Wide U Shaped Copper Scupper

Starting at:
$1,068.00
Short description:
  • Material: High Grade Copper
  • Width: 12 Inches
  • Lip Opening Width: 10 Inches
  • Lip Side Width: 1 Inch
  • Height: 12 Inches
  • Inlet Length: 4 Inches
  • Lip Length: 6 Inches
  • Full Length: 10 Inches
  • Flow Rate: 20-25 GPM (Gallons Per Minute)
  • Inlet: 1-1/2" Female
  • Inlet Location: Back Inlet (Standard)
  • Finishes: Handcrafted Finishes Are Subject To Slight Texture/Color Variations.

 

   Free Shipping on All Orders Continental United States!  Free Shipping | Ships in 1-2 Weeks Question | Why Buy From Us?

Available
+ −
Brand: The Outdoor Plus
Write a review

The 12-inch U-shaped pool scupper adds an elegant and beautiful touch to any architectural or outdoor living design, such as pools, spas, and fountains. The natural bubbling flow created by the internal baffles implements soothing sounds and sight to your backyard. The simple design makes a beautiful accessory to custom spillways or pools. There's no need for filters or a rock trap - the scupper's custom opening delivers a clog-free, continuous flow. Copper (with no plastic fabrication) will ensure that your water feature will stand the test of time.

PLEASE NOTE:

  • Copper will develop a patina over time when exposed to the elements, darkening the copper and eventually turning it blue-green. This is part of the natural oxidation process of the material.
  • BE AWARE THAT saltwater environments like a saltwater pool or even salty air near the ocean can greatly accelerate the patina progression.
  • The purer the copper, the more refined and higher percentage of copper in the product, the faster a patina will form.
  • If you wish to keep the copper bright and red, it will need to be sealed with a product like 'ProtestaClear' or 'Eventbrite' to prevent a patina from forming. 
  • For removal of the patina, we recommend the simple DIY recipe of 1/2 lemon juice and 1 tablespoon of baking soda mixed together. Using a soft cloth and working in a circular motion, gently scrub the outer surface of your copper product with the solution. Wipe it with a separate clean cloth, then rinse it with lukewarm water. Let air dry to avoid watermarks. A 3rd clean soft cloth can be used to buff the surface when completely dry.

Manufacturer's Warranty

All products have been tested and inspected for proper performance and defects prior to shipment from our plant(s) to the original purchaser of any products manufactured by: Custom Molded Products, LLC

This warranty is only valid to the original consumer of the product.
This warrants all manufactured products of Custom Molded Products
When properly assembled, installed, cleaned and maintained to be free from defective material and workmanship for a period of up to 3 years from the date of purchase based on the component schedule listed below:

All CMP products are warranted for structural integrity for a period of 15 months from the date of shipment or 12 months after installation, whichever occurs first, for defects in material and workmanship
 

IN THE EVENT PRODUCTS ARE ALTERED OR REPAIRED WITHOUT EXPRESSED WRITTEN CONSENT BY CMP, ALL WARRANTIES ARE VOID.

EXCLUSIONS OF WARRANTY:

  • Freight to and from Custom Molded Products (CMP) for any product returned for warranty.
  • Damage due to insuffcient or excessive electrical/water/gas supply is not covered by this warranty
  • Damage due to improper installation is not covered by this warranty
  • Powder coated finishes are not covered by this warranty unless defective out of the box prior to installation
  • Stainless steel, though stain resistant, is not guaranteed against mineral build up or rust.
  • Costs incurred that are not authorized in advance by Custom Molded Products (CMP).
  • This warranty certification does not cover stone, tile, stucco, brick or any other building material that is not resistant to water, copper, stainless steel or aluminum.
  • Damages or expenses which might be incurred in removal and replacement are not covered under this warranty
  • Corrosion, patina or other natural reactions of metals, are not covered by this warranty
  • Damage caused by improper use of chemicals and storage near chemicals is not covered by this warranty
  • Damage due to improper water chemistry is not covered by this warranty
  • Damage due to improperly grounded products is not covered by this warranty
  • Damage due to cleaning with non-recommended solutions is not covered by this warranty
  • Any defects due to acts of God, misuse, abuse, accident, ice damage, alteration, misapplication, vandalism, improper maintenance and/or service is not covered under this warranty


 

No posts found

Write a review

Click on the Add New button below to submit a question about this product. Please ONLY submit product questions. For all other inquiries, please contact us at 1-888-986-1535.

Add New
Last updated on March 25th 2022.
 
Share on Social Media!
 Share on Facebook Share on Twitter Save this product on Pintrest!